Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Vitamin B12
- Product Code
- 04745736160
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Roche Diagnostics
manufacturer
9115 Hague Road 46250 Indianapolis IN
1-800-428-5074
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| boric acid | 10043-35-3 | 0.1 - 1% | Yes |
| sodium hydroxide | 1310-73-2 | 1 - 5% | Yes |
| sodium cyanide | 143-33-9 | 0.1 - 1% | Yes |
| sucrose | 57-50-1 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.
Immediate medical treatment is necessary. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: untreated wounds from corrosion of the skin heal slowly and with difficulty.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Immediate Medical Attention
Take victim immediately to hospital. Immediate medical treatment is necessary for skin contact.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions.
Smoking, eating and drinking should be prohibited in the application area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No decomposition if stored and applied as directed.
No data available
No data available
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Mobility in soil
Other adverse effects
12.1 Toxicity
12.2 Persistence and degradability
12.4 Mobility in soil
Bioaccumulative potential
Bioaccumulative potential
Ecotoxicity
Not expected to adsorb on soil.
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
Not expected to adsorb on soil.
12.7 Other adverse effects
No data available
Toxicity
No data available regarding other organisms relevant to the environment.
Mobility in soil
The substance is not expected to adsorb on soil.
12.1 Toxicity
12.4 Mobility in soil
12.7 Other adverse effects
12.1 Toxicity
Very toxic to aquatic life with long lasting effects.
12.4 Mobility in soil
Not expected to adsorb on soil.
Persistence and degradability
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
Ecotoxicity
Toxicity Data on Soil
Not expected to adsorb on soil.
12.1 Toxicity
The substance is not expected to have ecotoxicological effects based on available data.
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
Mobility in soil
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a licensed waste management company.
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1824
- Shipping Name
- Sodium hydroxide solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Vitamin B12?
The signal word is danger.
What is the physical form of Vitamin B12?
Vitamin B12 is a liquid appearing as liquid .
What are the hazard statements for Vitamin B12?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H360: May damage fertility or the unborn child.
What is the melting point of Vitamin B12?
The melting point is No data available and the boiling point is No data available.