Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Testosterone II CalSet II
- Product Code
- 05202230190
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Roche Diagnostics
manufacturer
9115 Hague Road, 46250 Indianapolis IN
1-800-428-5074
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-methyl-2H-isothiazol-3-one hydrochloride | 26172-54-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Call a physician or poison control centre immediately. Move to fresh air. If unconscious place in recovery position and seek medical advice.
If on skin, rinse well with water.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital. Rinse mouth with water.
Immediate Medical Attention
Call a physician or poison control centre immediately (inhalation). Take victim immediately to hospital (ingestion).
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
No information available.
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. Local authorities should be advised if significant spillages cannot be contained.
Keep in suitable, closed containers for disposal.
Materials: suitable, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of respirable particles. Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place.
Smoking, eating and drinking should be prohibited in the application area. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Protective gloves Remarks: The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water Tightly fitting safety goggles
In the case of dust or aerosol formation use respirator with an approved filter. Effective dust mask
Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use. No decomposition if stored and applied as directed.
No data available
No data available
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Other adverse effects
The product does not contain, nor was it manufactured with, Class I or Class II ozone-depleting substances as defined by the U.S. Clean Air Act.
Ecotoxicity
The substance has no known acute or chronic ecotoxicological effects.
Other adverse effects
The product does not contain or was not manufactured with Class I or Class II ozone-depleting substances as defined by the U.S. Clean Air Act.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Special treatment as infectious material is mandatory in compliance with local regulations (disinfection and incineration).
Send to a licensed waste management company. Can be disposed as waste water, when in compliance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Testosterone II CalSet II?
The signal word is danger.
What is the physical form of Testosterone II CalSet II?
Testosterone II CalSet II is a solid appearing as solid with white light yellow color. It has very faint odor.
What is the solubility of Testosterone II CalSet II?
No data available
What are the hazard statements for Testosterone II CalSet II?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
What is the melting point of Testosterone II CalSet II?
The melting point is No data available and the boiling point is No data available.