Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
To be used in conjunction with Tristel Fuse for Surfaces Activator solution. For professional use only.
Uses advised against
Uses other than the intended use of the product.
Manufacturers & Suppliers
Tristel Solutions Limited
manufacturer
Lynx Business Park, Fordham Road, Newmarket, Cambridgeshire, CB8 7NY, United Kingdom
+44 (0) 1638 721 500
Emergency Contacts
Emergency Contact
+44 (0) 1638 721 500
office hours only
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours.
Symptoms: There may be irritation of the throat with a feeling of tightness in the chest.
Wash immediately with plenty of soap and water.
Symptoms: There may be irritation and redness at the site of contact.
Bathe the eye with running water for 15 minutes.
Symptoms: There may be irritation and redness. The eyes may water profusely.
Wash out mouth with water.
Symptoms: There may be soreness and redness of the mouth and throat.
Immediate Medical Attention
If skin irritation or rash occurs: Get medical advice. Seek medical attention if eye irritation persists.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Turn leaking containers leak-side up to prevent the escape of liquid.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: closable, labelled salvage container
Related Products
Similar products with comparable safety profiles
TRISTEL FUSE FOR SURFACES BASE SOLUTION
---
TRISTEL FUSE FOR SURFACES ACTIVATOR SOLUTION
---
TRISTEL FUSE FOR LABS BASE SOLUTION
---
TRISTEL DUO ULT BASE SOLUTION
UFI: EQ10-F0GE-Y00U-9X61
TRISTEL FUSE FOR LABS ACTIVATOR
---
TRISTEL DUO ULT ACTIVATOR SOLUTION
---
TRISTEL RINSE WIPE
---
Trizma® base
CAS: 77-86-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Avoid the formation or spread of mists in the air.
Store in a cool, well ventilated area. Keep container tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area.
Protective gloves.
Safety glasses. Ensure eye bath is to hand.
Self-contained breathing apparatus must be available in case of emergency.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.
Heat
Strong oxidising agents.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED)?
The signal word is warning.
What is the physical form of TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED)?
TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED) is a liquid with green color.
What is TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED) used for?
To be used in conjunction with Tristel Fuse for Surfaces Activator solution. For professional use only.
What are the hazard statements for TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED)?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of TRISTEL FUSE FOR SURFACES BASE SOLUTION (FRAGRANCED)?
The melting point is No data available. and the boiling point is No data available..