Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alere Afinion™ CRP Control
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use, In Vitro Diagnostic Medical Device
Uses advised against
No additional information available
Manufacturers & Suppliers
Alere Technologies AS
national supplier
Kjelsåsveien 161, P.O. Box 6863 Rodeløkka, NO-0504 Oslo - Norway
+47-24056000
http://www.alere.com
Alere Technologies AS
manufacturer
Kjelsåsveien 161, P.O. Box 6863 Rodeløkka, NO-0504 Oslo - Norway
+47-24056000
http://www.alere.com
Emergency Contacts
National Poisons Information Service (Newcastle Unit)
+44 191 2606182
24H
National Poisons Information Service (Newcastle Unit)
+44 191 2606180
24H
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium azide EC: 247-852-1 | 26628-22-8 | 0.1% | Yes |
Notes
None of the other components are subject to classification, or are present in quantities above regulatory disclosure limits
First Aid Measures
Emergency procedures for chemical exposure incidents
No specific first aid measures noted.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Immediately flush with plenty of water or eyewash solution for up to 10 minutes. Obtain medical attention if pain, blinking or redness persist.
(If swallowed, rinse mouth with water (only if the person is conscious)). Drink a few glasses of water or milk. Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate for surrounding fire.
None to our knowledge.
Non flammable.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper personal protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Prevent entry to sewers and public waters.
Take up liquid spill into absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wear appropriate personal protective equipment - see Section 8.
2 - 8 °C (36 - 46°F)
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide eyewash station.
Wear suitable gloves resistant to chemical penetration. Neoprene or nitrile rubber gloves. Layer thickness : 0,10mm. Breakthrough time : >480 min. STANDARD EN 374
Not necessary under the recommended storage and handling conditions. Use splash goggles when eye contact due to splashing is possible. STANDARD EN 166
Respiratory protection not applicable
Lab coat
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
Stable under normal conditions.
Not established.
Avoid strong heating.
None to our knowledge.
No decomposition if stored normally.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alere Afinion™ CRP Control?
The signal word is no signal word.
What is the physical form of Alere Afinion™ CRP Control?
Alere Afinion™ CRP Control is a liquid with yellow. color. It has no data available odor.
What is the solubility of Alere Afinion™ CRP Control?
Soluble in water.
What is Alere Afinion™ CRP Control used for?
Professional use, In Vitro Diagnostic Medical Device