Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CellaVision Oil Pack
- Product Code
- XU-10135-01, XU-10135-02
- Chemical Name
- IO Type 300 Immersion Oil
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Microscope Immersion Oil
Manufacturers & Suppliers
CellaVision AB
manufacturer
Ideon Science Park, SE-223 70 Lund, Sweden
+46-(0)46-286 44 00
http://www.cellavision.com
Emergency Contacts
toxicological information
911
toxicological information
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product consists of a homogeneous liquid mixture.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MINERAL OIL EC: 232-455-8 | 8042-47-5 | 30 - 50% | No |
| HYDROGENATED TERPHENYL EC: 262-967-7 | 61788-32-7 | 30 - 50% | No |
| POLYBUTENE EC: 500-004-7 | 9003-29-6 | 15 - 30% | No |
| TERPHENYL EC: 247-477-3 | 26410-60-3 | 5 - 9% | No |
Explanations to the classification and labelling of the ingredients are given in Section 16e. Official abbreviations are printed in normal font. Text in italics are specifications and/or complement used in the calculation of the hazards of this mixture, see Section 16b
Notes
Note that the table shows known hazards of the ingredients in a pure form. These hazards are reduced or eliminated when mixed or diluted, see Section 16d.
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow the injured person to rest in a warm place with fresh air, if symptoms persist seek medical advice. Administer oxygen if required.
Remove contaminated clothes. Wash the skin with soap and water.
Flush eyes immediately with lukewarm water for 15 – 20 minutes with wide-open eyes. Seek medical attention at once.
DO NOT induce vomiting. Contact a doctor.
Immediate Medical Attention
Seek medical attention at once (for eye contact). Contact a doctor (for ingestion). If symptoms persist seek medical advice (for inhalation).
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water mist, powder, carbon dioxide or alcohol resistant foam
Produces fumes containing harmful gases (carbon monoxide and carbon dioxide) when burning, and, in case of incomplete combustion, aldehydes and other toxic, harmful, irritant or environmentally harmful substances.
Protective measures should be taken regarding other material at the site of the fire.
Firefighter Protection
In case of fire use a respirator mask.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use recommended safety equipment, see section 8.
Avoid emissions into soil, water or air.
Collect the material for disposal at a waste disposal facility.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not inhale the fumes and avoid exposure to skin, eyes and clothing.
Store this product separately from food items and keep it out of the reach of children and pets.
Do not eat, drink or smoke in premises where this product is stored.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves are normally not needed due to the properties of this product, but may be necessary for other reasons, e.g. mechanical risks, temperature conditions or microbiological risks.
Use protective glasses, safety goggles, or a visor.
Use proper protective breathing equipment in case of insufficient ventilation.
Special measures for protection of the skin are necessary only in rare working situations.
For limitation of environmental exposure, see Section 12.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable at normal storage and handling conditions.
The product contains no substances which can lead to hazardous reactions at normal use.
No hazardous reactions known.
Protect from heat.
Avoid contact with oxidizers.
Carbon monoxide (CO), carbon dioxide (CO₂) and harmful and irritating substances.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Information about the effects on the environment is not available.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No information regarding bioaccumulation is available.
12.4 Mobility in soil
Information about mobility in nature is not available
12.5 Results of PBT and vPvB assessment
No chemical safety report has been executed.
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Discarded products must be disposed of as hazardous waste in accordance with regulations. Residual, old or contaminated product should be disposed of at a waste management facility.
Discarded products must be disposed of as hazardous waste in accordance with regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CellaVision Oil Pack?
The signal word is no signal word.
What is the physical form of CellaVision Oil Pack?
CellaVision Oil Pack is a liquid appearing as form: liquid colour: light yellow with light yellow color. It has weak smell characteristic odor.
What is the solubility of CellaVision Oil Pack?
Not applicable
What is CellaVision Oil Pack used for?
Microscope Immersion Oil
What is the melting point of CellaVision Oil Pack?
The melting point is 0 °C and the boiling point is 340 °C at atmospheric pressure (101325 Pa).