Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Chrome iron oxide
- Product Form
- Substance
- Product Code
- A 25, A 38, A 53, B 25
- Chemical Name
- Chrome iron oxide
- Synonyms
- Chromite
Regulatory Identifiers
- CAS Number
- 98072-82-3 Check regulations →
- EC Number
- 308-539-6 Check regulations →
- REACH No.
- Exempted in accordance with Annex V.7
Identified Uses
For use in: Glass, Ceramics.
Uses advised against
This product must not be used in applications other than those identified above, without first seeking advice of the supplier
Manufacturers & Suppliers
SCR-Sibelco NV
manufacturer
Plantin en Moretuslei 1A, 2018 Antwerpen - Belgium
Sibelco Geertruidenberg
national supplier
Centraleweg 52, 4931 NB Geertruidenberg - The Netherlands
+31 (0)43 3663636
Sibelco Balaruc-les-Bains
national supplier
Chemin d'Aymes 110, PB 3, 34540 Balaruc-les-Bains - France
+33 1 70 97 94 34
Emergency Contacts
Sibelco
+31 43 3663755
during office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quartz (fine fraction) EC: 238-878-4 | 14808-60-7 | 1% | Yes |
| Chrome iron oxide EC: 308-539-6 | 98072-82-3 | 80% | No |
Notes
Substance containing a main component
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person away from the contaminated area and into the fresh air.
No special first aid measures necessary.
Rinse with copious quantities of water and seek medical attention if irritation persists.
No first aid measure required.
Immediate Medical Attention
No special first aid measures necessary.
Medical Treatment
No special first aid measures necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
No specific extinguishing media is needed.
No restriction on the extinguishing media to be used.
Fire hazard : Not combustible.
Firefighter Protection
No specific fire-fighting protection is required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special requirements.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid airborne dust generation. Handle packaged products carefully to prevent accidental bursting. If you require advice on safe handling techniques, please contact your supplier.
Minimise airborne dust generation and prevent wind dispersal during loading and unloading. Keep containers closed and store packaged products so as to prevent accidental bursting.
Do not eat, drink and smoke in work areas; wash hands after use; remove contaminated clothing and protective equipment before entering eating areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimise airborne dust generation. Use process enclosures, local exhaust ventilation or other engineering controls to keep airborne levels below specified exposure limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne particles below the exposure limit. Apply organisational measures, e.g. by isolating personnel from dusty areas.
Appropriate protection (e.g. gloves, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin. Wash hands at the end of each work session.
Wear safety glasses with side-shields in circumstances where there is a risk of penetrative eye injuries.
In case of prolonged exposure to airborne dust concentrations, wear a respiratory protective equipment that complies with the requirements of European or national legislation. The use of half or full face masks with filters against particles of category 2 or 3 (FP2 - FP3) is recommended. See EN 143: 2021 - Respiratory protective devices. Particle filters
No specific requirement. Appropriate protection (e.g. gloves, barrier cream) is recommended for workers who suffer from dermatitis or sensitive skin.
Avoid wind dispersal.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically stable.
Inert, not reactive.
No hazardous reactions.
Not relevant.
No particular incompatibility.
Not relevant.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Chrome iron oxide known by?
Chrome iron oxide is also known as: Chromite
What is the hazard signal word for Chrome iron oxide?
The signal word is no signal word.
What is the physical form of Chrome iron oxide?
Chrome iron oxide is a solid appearing as powder with brown, green color. It has odourless odor.
What is the solubility of Chrome iron oxide?
Water: Negligible
What is Chrome iron oxide used for?
For use in: Glass, Ceramics.
What is the melting point of Chrome iron oxide?
The melting point is > 1000 °C and the boiling point is Not applicable (solid inorganic substance).