LUBRODAL W 27 F

Supply fresh air; consult doctor in case of symptoms.

Wash with soap and water.

Symptoms: May cause skin irritation.

Promptly wash eyes with plenty of water while lifting the eye lids.

Symptoms: May cause eye irritation.

Rinse mouth thoroughly.

CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable surfactant added

Water with a full water jet.

During fire, gases hazardous to health may be formed.

Move container from fire area if it can be done without risk. Generally this product is not burnable on account of its water content.

In case of spills, beware of slippery floors and surfaces.

Do not contaminate water sources or sewer. Prevent further leakage or spillage if safe to do so. Prevent from spreading (e.g. by binding or oil barriers). Avoid release to the environment. Environmental manager must be informed of all major spillages.

Absorb with liquid-binding material.

Materials: sand, diatomite, acidbinders, universal binders, sawdust

Avoid contact with eyes, skin, and clothing. Wash hands thoroughly after handling. Do not eat, drink or smoke when working with the product. Take usual precautions when handling mineral oil products or chemical products.

Store in original tightly closed container. Keep separate from food, feedstuffs, fertilizers and other sensitive material. Store away from incompatible materials. No special precautions necessary if used correctly. Use only containers specifically permitted for this substance/product. Protect from contamination

Observe good industrial hygiene practices.

Provide adequate ventilation. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Material: Nitrile butyl rubber (NBR). Min. Breakthrough time: >= 480 min Recommended thickness of the material: >= 0,38 mm. Avoid long-term and repeated skin contact. Suitable gloves can be recommended by the glove supplier. Use skin protection cream for preventive skin protection. Protective gloves, where permitted in acc. to safety directions. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Avoid contact with skin and eyes. Goggles/face shield are recommended. If risk of splashing, wear safety goggles or face shield.

Ensure good ventilation/exhaustion at the workplace. Avoid breathing vapour/ aerosol.

Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.

No data available.

Stable under normal use conditions.

Stable under normal temperature conditions and recommended use. Stable under normal use conditions.

None under normal conditions.

Stable under normal use conditions.

Strong oxidizing substances. Strong acids. Strong bases.

No dangerous decomposition products known Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.