Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Shell Morlina S2 BL 10
- Product Code
- 001F8471
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Bearing & Circulating Oil
Uses advised against
This product must not be used in applications other than those listed in Section 1 without first seeking the advice of the supplier.
Manufacturers & Suppliers
Shell Canada Products
manufacturer
4000-500 Centre Street SE, Calgary AB T2G 1A6, Canada
(+1) 8006611600
Emergency Contacts
CHEMTREC
1 (703) 527-3887
24 hr
CHEMTREC
1 (800) 424-9300
24 hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Synthetic base oil and additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (Fischer - Tropsch), heavy, C18-50 - branched, cyclic and linear | 848301-69-9 | 70 - 90% | No |
| distillates (petroleum), hydrotreated light | 64742-47-8 | 15% | No |
| N-phenyl-1-naphthylamine | 90-30-2 | 0.1 - 0.24% | No |
| (4-nonylphenoxy)acetic | 3115-49-9 | 0.09% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice.
Symptoms: coughing, choking, wheezing, difficulty in breathing, chest congestion, shortness of breath, and/or fever.
Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention.
Symptoms: Defatting dermatitis signs and symptoms may include a burning sensation and/or a dried/cracked appearance.
Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs, obtain medical attention.
Call emergency number for your location / facility. If swallowed, do not induce vomiting: transport to nearest medical facility for additional treatment. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.
Symptoms: nausea, vomiting and/or diarrhoea.
Immediate Medical Attention
If any of the following delayed signs and symptoms appear within the next 6 hours, transport to the nearest medical facility: fever greater than 101° F (38.3°C), shortness of breath, chest congestion or continued coughing or wheezing.
Medical Treatment
Potential for chemical pneumonitis. Call a doctor or poison control center for guidance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only.
Do not use water in a jet.
Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs. Unidentified organic and inorganic compounds.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Proper protective equipment including chemical resistant gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter's clothing approved to relevant Standards (e.g. Europe: EN469).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Local authorities should be advised if significant spillages cannot be contained.
Slippery when spilt. Avoid accidents, clean up immediately. Reclaim liquid directly or in an absorbent. Soak up residue with an absorbent such as clay, sand or other suitable material and dispose of properly.
Materials: absorbent such as clay, sand or other suitable material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Keep container tightly closed and in a cool, well-ventilated place. Use properly labeled and closable containers. Store at ambient temperature.
Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.
Reacts with strong oxidising agents.
Extremes of temperature and direct sunlight.
Strong oxidising agents.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Shell Morlina S2 BL 10?
The signal word is danger.
What is the physical form of Shell Morlina S2 BL 10?
Shell Morlina S2 BL 10 is a liquid with colourless color. It has slight hydrocarbon odor.
What is Shell Morlina S2 BL 10 used for?
Bearing & Circulating Oil
What are the hazard statements for Shell Morlina S2 BL 10?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of Shell Morlina S2 BL 10?
The melting point is Data not available and the boiling point is Data not available.