Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Mineral Wool Products
- Product Code
- MILL BOARD 85KB
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
INSULCON B.V.
manufacturer
P.O. Box 134, 4650 AC STEENBERGEN, The Netherlands; Zilverhoek 4, 4651 SP STEENBERGEN
+31 (0)167-565750
http://www.insulcon.com
INSULCON GMBH
manufacturer
Germany
+49 (0)2162 249 60-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral wool contains: >18% in weight CaO, MgO, NaO, K₂O
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Man Made Mineral wool | 287922-11-6 | --- | No |
Notes
Description Mineral wool products are available in the form of: boards and shapes. According to product form, other ingredients may be present (see appended).
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to a dust free area, drink water and blow nose.
Symptoms: Nose and throat irritation.
Rinse affected areas with water and wash gently. Do not rub or scratch exposed skin.
Symptoms: Skin irritation.
Flush abundantly with water. Do not rub eyes.
Immediate Medical Attention
If symptoms persist, seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing agent suitable for surrounding combustible materials.
Non combustible products. Packaging and surrounding materials may be combustible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Pick up large pieces and use a vacuum cleaner fitted with high efficiency filter (HEPA). If brushing is used, ensure that the area is wetted down first. Do not use compressed air for clean-up.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The Process or processes should be designed to limit the amount of handling. Regular good housekeeping will minimise secondary dust dispersal.
Store in original packaging in dry area whilst awaiting use. Always use sealed and visibly labelled containers. Avoid damaging containers.
Regular good housekeeping will minimise secondary dust dispersal.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust ventilation, which collects dust at source, can be used. For example down draft tables, emission controlling tools and material handling equipment.
Wear gloves and work clothes, which are loose fitting at the neck and wrists.
As necessary wear goggles or safety glass with side shields
For dust concentrations below the exposure limit value, RPE is not required but FFP2 respirators may be used on a voluntary basis. For short term operations where excursions are less than ten times the limit value use FFP2 respirators. In case of higher concentrations or where the concentration is not known, please seek advice from your company and/or your supplier.
Wear gloves and work clothes, which are loose fitting at the neck and wrists. Soiled clothes should be cleaned to remove excess fibres before being taken off (e.g. use vacuum cleaner, not compressed air).
Refer to local, national or European applicable environmental permitted standards for release to air, water and soil. For waste, refer to section13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
N.A.
N.A.
Thermal decomposition of the organic binder contained within the shapes and boards is possible. During first heating, oxidation products from the organic binder might be emitted in a temperature range from 180°C to 600°C.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Mineral Wool Products?
The signal word is no signal word.
What is the physical form of Mineral Wool Products?
Mineral Wool Products is a solid appearing as grey-green with grey-green color.
What is the melting point of Mineral Wool Products?
The melting point is >1000°C .