Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WOLF AROWEP ISO 68
- Product Form
- Mixture
- Product Code
- 4107
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Main use category : Industrial use, Professional use, Consumer use Industrial/Professional use spec : Non-dispersive use Used in closed systems Function or use category : Lubricants and additives
Uses advised against
No additional information available
Manufacturers & Suppliers
WOLF OIL CORPORATION N.V.
manufacturer
Georges Gilliotstraat, 52, 2620 Hemiksem, Antwerpen, België
0032 (0)3 870 00 00
https://www.wolflubes.com/
Emergency Contacts
Emergency Contact
0032 (0)3 870 00 00
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
Healthcare professionals-24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
public, 8am - 10pm, 7/7
Israel Poison Information Center Rambam Health Care Campus
+972 4 854 1900
Medicines & Poisons Info Office
+356 2545 6508
Giftinformationscentralen
112
Giftinformationscentralen
+46 10 456 6700
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphoric acid ester amine salt EC: 931-384-6 | --- | 0.1 - 0.24% | Yes |
| Polysulphides, di-tert-Bu EC: 273-103-3 | 68937-96-2 | 0.1 - 0.99% | Yes |
| (Z)-N-octadecenylpropane-1,3-diamine EC: 230-528-9 | 7173-62-8 | 0.01 - 0.024% | Yes |
Notes
The mineral oils in the product contain < 3% DMSO extract (IP 346)
First Aid Measures
Emergency procedures for chemical exposure incidents
Not expected to require first aid measures.
Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.
Wash skin with mild soap and water.
Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.
In case of eye contact, immediately rinse with clean water for 10-15 minutes.
Symptoms: Not expected to present a significant eye contact hazard under anticipated conditions of normal use.
Do not induce vomiting. Rinse mouth.
Symptoms: Not expected to present a significant ingestion hazard under anticipated conditions of normal use.
Immediate Medical Attention
Get immediate medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Powder. Dry chemical product.
Do not use a heavy water stream.
No additional information available
Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent entry to sewers and public waters.
Detergent. Take up liquid spill into absorbent material sand, saw dust, kieselguhr.
Materials: Detergent, absorbent material, sand, saw dust, kieselguhr
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid all unnecessary exposure.
Store in dry, cool, well-ventilated area.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Permeation time: minimum >480min long term exposure; material / thickness [mm]: >0,35 mm. Nitrile rubber (NBR) /
Safety glasses.
No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation.
No special clothing/skin protection equipment is recommended under normal conditions of use
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None under normal conditions.
None under normal conditions.
No data available.
Strong oxidizers. acids. Bases.
None under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WOLF AROWEP ISO 68?
The signal word is no signal word.
What is the physical form of WOLF AROWEP ISO 68?
WOLF AROWEP ISO 68 is a liquid appearing as oily liquid. with brown. color. It has characteristic. odor.
What is the solubility of WOLF AROWEP ISO 68?
Slightly soluble, the product remains on the water surface.
What is WOLF AROWEP ISO 68 used for?
Main use category : Industrial use, Professional use, Consumer use Industrial/Professional use spec : Non-dispersive use Used in closed systems Function or use category : Lubricants and additives
What is the melting point of WOLF AROWEP ISO 68?
The melting point is Not available and the boiling point is Not available.