Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE
- Product Code
- J.T. Baker: 491D, 9347, W591; Mallinckrodt: 2793
- Chemical Name
- 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE
- Synonyms
- Freon® TF Solvent; Freon® 113; Fluorocarbon 113; 1,1,2-Trichlorotrifluoroethane
Regulatory Identifiers
- CAS Number
- 76-13-1 Check regulations →
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,1,2-Trichloro-1,2,2-trifluoroethane | 76-13-1 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.
Immediately flush skin with plenty of water for at least 15 minutes. Call a physician if irritation develops.
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.
Immediate Medical Attention
Call a physician.
Medical Treatment
Do not give epinephrine or adrenergic activator as they will further sensitize the heart to development of arrhythmias.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use any means suitable for extinguishing surrounding fire.
Not considered to be a fire hazard. When involved in fire, however, emits suffocating and toxic decomposition products.
Water spray may be used to keep fire exposed containers cool.
Firefighter Protection
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition. Ventilate area of leak or spill. Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Contain and recover liquid when possible. Collect liquid in an appropriate container or absorb with an inert material (e.g., vermiculite, dry sand, earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust.
Do not flush to sewer!
Collect liquid in an appropriate container or absorb with an inert material (e.g., vermiculite, dry sand, earth), and place in a chemical waste container.
Materials: vermiculite, dry sand, earth
Related Products
Similar products with comparable safety profiles
1,1,2-Trichlorotrifluoroethane
---
1,1,2-Trichlorotrifluoroethane
CAS: 76-13-1
1-Bromo-1-chloro-2,2,2-trifluoroethane
CAS: 151-67-7
Tetrachloro-1,2-difluoroethane
CAS: 76-12-0
1,2-Dichlorotetrafluoroethane
CAS: 76-14-2
1-Chloro-1,1-difluoroethane
---
1,1,2-Trichloroethane
CAS: 79-00-5
1,1-Difluoroethane
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep in a tightly closed container. Protect against physical damage. Isolate from any source of heat or ignition. Isolate from incompatible substances. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.
Stored in a cool, dry, ventilated area. Store below boiling point.
Isolate from any source of heat or ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Wear protective gloves
Use chemical safety goggles.
If the exposure limit is exceeded, wear a supplied air, full-facepiece respirator, airlined hood, or full-facepiece self-contained breathing apparatus. The cartridges recommended for this material have a predicted service of less than 30 minutes at concentrations of ten times (10x) the exposure limits. Actual service life will vary considerably, depending on concentration levels, temperature, humidity, and work rate.
clean body-covering clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under ordinary conditions of use and storage.
Will not occur.
Heat, flames, ignition sources and incompatibles.
Alkali or alkaline earth metals, powdered aluminum, zinc, beryllium, magnesium, other chemically active metals, acids, heat and open flame.
Hydrogen fluoride, hydrogen chloride, phosgene, carbonyl fluoride, chloride and fluoride gases may be released when this material is heated to decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE known by?
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE is also known as: Freon® TF Solvent; Freon® 113; Fluorocarbon 113; 1,1,2-Trichlorotrifluoroethane
What is the hazard signal word for 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE?
The signal word is warning.
What is the physical form of 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE?
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE is a liquid appearing as clear, colorless liquid. with colorless color. It has slight ethereal odor. odor.
What are the hazard statements for 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE?
This substance has 4 hazard statements:
- H316: MAY CAUSE IRRITATION TO SKIN.
- H332: HARMFUL IF INHALED.
- H335: CAUSES IRRITATION TO EYES AND RESPIRATORY TRACT.
- H373: AFFECTS CARDIOVASCULAR AND CENTRAL NERVOUS SYSTEM.
What is the melting point of 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE?
The melting point is -35C (-31F) and the boiling point is 47 - 48C (117 - 118F).