Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Vibron 160 K85
- Chemical Name
- Silicon Carbide
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
NV Gouda Vuurvast
manufacturer
Goudkade 16, 2802 AA Gouda, The Netherlands
+31(0)182591400
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminum oxide | 1344-28-1 | 10% | No |
| Alumina cement | 12042-68-1 | 25% | No |
| Silicon carbide | 409-21-2 | 75% | No |
| Amorphous silica | 7631-86-9 | 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to a dust free area
Wash with soap and water
Dust should be flushed with clean water. Contact lenses should not be worn with dust in the air.
Not a normal way of entry. Drink large quantities of water and consult a doctor
Immediate Medical Attention
consult a doctor
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special precautions
Normal clean-up procedure
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent dust formation and ensure adequate ventilation/dust extraction
Cool and dry
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
With water the material will harden
Moisture; may cause lumps. Cast pieces may be subjected to steam spalling if improperly cured, dried or fired. Contact NV Gouda Vuurvast for correct dry out procedure
Water; may cause lumps
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Vibron 160 K85?
The signal word is danger.
What is the physical form of Vibron 160 K85?
Vibron 160 K85 is a solid appearing as dark grey, dry mix, grains up to 3 mm, no odor with dark grey color. It has no odor odor.
What are the hazard statements for Vibron 160 K85?
This substance has 8 hazard statements:
- EUH208: Nuisance dust may occur, causing irritation to skin and upper respiratory tract.
- EUH212: Product may contain trace amounts of crystalline silica.
- H316: Product may dry skin.
- H316: Skin: May dry and irritate skin
- H335: Eye: Dust may be dangerous for the eyes
- H335: Inhalation: During mixing, dust will be developed and may cause irritation.
- H335: During heating of installed product above 100°C, emission of vapours will occur. Inhalation of these vapours should be avoided.
- H372: Long term exposure to crystalline silica can cause silicosis, bronchitis and lung damage.
What is the melting point of Vibron 160 K85?
The melting point is >1800 [°C] .