cobas 4800 System Wash Buffer Kit

Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

If on skin, rinse well with water.

Symptoms: May cause an allergic skin reaction.

Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Rinse mouth with water.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

High volume water jet

No information available.

Standard procedure for chemical fires.

Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.

Keep container tightly closed in a dry and well-ventilated place.

Wash hands before breaks and at the end of workday.

Normal measures for preventive fire protection.

No data available

In case of contact through splashing: Material: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0,11 mm. In case of full contact: Material: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0,4 mm. Remarks: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Eye wash bottle with pure water; Tightly fitting safety goggles

Impervious clothing; Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Stable under normal conditions.

No dangerous reaction known under conditions of normal use.

No decomposition if stored and applied as directed.

Temperatures greater than recommended storage temperature.

No data available

No data available