NextSDS Logo
Safety Data Sheet EN

QUARTZ INEO FIRST 0W-30

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
QUARTZ INEO FIRST 0W-30

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Motor oil

Manufacturers & Suppliers

T

TotalEnergies Lubrifiants

manufacturer

562 Avenue du Parc de L'ile, 92029 Nanterre Cedex FRANCE

+33 (0)1 41 35 40 00

T

TotalEnergies Marketing Asia-Pacific Middle East Pte. Ltd.

distributor

182 Cecil Street, #27-01 Frasers Tower, Singapore 069547

+65 6879 2200

Emergency Contacts

Asia-Pacific

+65 3158 1074

Middle-East

+44 1235 239671

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Acute Cat. 3

GHS Pictograms

Hazard Statements

H402 Harmful to aquatic life.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read carefully and follow all instructions.
P273 Avoid release to the environment.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 64742-54-7 50 - 75% No
Dec-1-ene, homopolymer, hydrogenated EC: 500-183-1 68037-01-4 10% No
1-Dodecene, polymer with 1-decene, hydrogenated 151006-60-9 10% No
Distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7 64742-65-0 3% No
Distillates (petroleum), solvent-dewaxed light paraffinic EC: 265-159-2 64742-56-9 3% No
Paraffin oils (petroleum), catalytic dewaxed heavy EC: 265-174-4 64742-70-7 3% No
C14-16-18 Alkyl phenol EC: 931-468-2 --- 0.3% No
2-(2-heptadec-8-enyl-2-imidazolin-1-yl)ethanol EC: 202-414-9 95-38-5 0.1% No

Mineral oil of petroleum origin. Product containing mineral oil with less than 3% DMSO extract as measured by IP 346 The product is made from synthetic base oils

Notes

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. The total concentration of ingredients in this product, reported or not in this section, is 100%.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards. No specific data.

Skin contact

Wash skin thoroughly with soap and water or use recognized skin cleanser. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Symptoms: Defatting to the skin. May cause skin dryness and irritation. Adverse symptoms may include the following: irritation, dryness, cracking.

Eye contact

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.

Symptoms: No known significant effects or critical hazards. No specific data.

Ingestion

Wash out mouth with water. Remove dentures if any. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: No known significant effects or critical hazards. No specific data.

Immediate Medical Attention

Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst. This material is harmful to aquatic life.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation.

Small spill

Stop leak if without risk. Move containers from spill area. Absorb with an inert material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations. Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Absorb with an inert material and place in an appropriate waste disposal container.

Materials: inert material, non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Avoid release to the environment. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.

Storage

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
Not soluble
Melting Point
Technically not possible to measure
Solidification Point
---
Colour Intensity
---
Decomposition Temperature
Not applicable.
Metal Corrosion
---
State Under Standard Conditions
---
Dynamic Viscosity
Not available.
Density
0.836 to 0.846 g/cm³ [15°C] [ISO 12185]
Physical State Data
liquid
Softening Point
---
Vapor Density
>2 [Air = 1]
Solubility
---
Appearance
Clear.
Cloud Point
---
Ph
Not applicable.
Form
---
Vapor Pressure
<0.01 kPa (<0.075 mm Hg) [room temperature]
Upper Explosive Limit
7%
Explosive Limits
---
Evaporation Rate
Not available.
Bulk Density
---
Relative Density
0.836 to 0.846 [ISO 12185]
Relative Evaporation Rate
---
Odor
Characteristic.
Physical State
Liquid.
Odor Threshold
Not available.
Colour
Clear.
Lower Explosive Limit
0.9%
Freezing Point
---
Auto Ignition Temperature
>230°C (>446°F) [ASTM E 659]
Partition Coefficient
Not applicable.
Boiling Point
>316°C (>600.8°F) [ISO 3405]
Flash Point
Open cup: 230°C (446°F) [ASTM D 1298]
Properties Status
---
Crystallisation Point
---
Solubility In Fat
---
Molecular Weight
---
Kinematic Viscosity
47 to 54 mm²/s (47 to 54 cSt) [ASTM D 445]
Voc Content
---
Flammability
Non-flammable.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage and handling conditions (see Section 7).

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

No specific data.

Incompatible

Strong oxidizing agents

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IMDG

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for QUARTZ INEO FIRST 0W-30?

The signal word is no signal word.

What is the physical form of QUARTZ INEO FIRST 0W-30?

QUARTZ INEO FIRST 0W-30 is a liquid. appearing as clear. with clear. color. It has characteristic. odor.

What is QUARTZ INEO FIRST 0W-30 used for?

Motor oil

What are the hazard statements for QUARTZ INEO FIRST 0W-30?

This substance has 1 hazard statement:

  • H402: Harmful to aquatic life.

What is the melting point of QUARTZ INEO FIRST 0W-30?

The melting point is Technically not possible to measure and the boiling point is >316°C (>600.8°F) [ISO 3405].