Touch N Seal Storm Bond 2 Roof Tile Adhesive HFO 200 Kit B Side

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Symptoms: difficulty in breathing

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Use a rag to remove excess foam from skin and remove contaminated clothing. Use of a solvent, such as acetone (nail polish remover) or mineral spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact). Cured foam may be physically removed by persistent washing with soap and water. If irritation develops, use mild skin cream. If irritation persists, obtain medical attention.

Symptoms: irritation

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Symptoms: irritation

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Alcohol Foam, Carbon Dioxide, Dry Chemical, Water Spray or Fog, Water

Closed containers may burst if exposed to extreme heat or fire. Containers may explode if exposed to extreme heat.

Use water spray to cool exposed surfaces.

Contain spilled material and remove with inert absorbent. Use personal protective equipment as necessary. Uncured product is very sticky, so carefully remove the bulk of the foam by scraping it up and then immediately remove residue with a rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner, etc. Once the product has cured, it can only be removed physically by scraping, buffing, etc. Spilled material becomes very slippery when wet. Sweep-up to prevent slipping hazard.

No Information

remove with inert absorbent; remove the bulk of the foam by scraping it up and then immediately remove residue with a rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner, etc.; Once the product has cured, it can only be removed physically by scraping, buffing, etc.; Sweep-up to prevent slipping hazard.

Materials: inert absorbent, rag, solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Keep containers away from excessive heat and freezing. Keep containers away from moisture. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Wash thoroughly after handling. Do not re-use empty containers.

Protect material from direct sunlight. Keep containers tightly closed in a dry, cool and well-ventilated place. Store containers away from excessive heat and freezing.

Wash thoroughly after handling.

Keep away from open flames, hot surfaces and sources of ignition.

Stable under recommended storage conditions.

Reacts with isocyanates.

Excessive heat and freezing.

strong bases and oxidizing agents.

Normal decomposition products, i.e., COx, NOx.