Touch N Seal Foam Kit 120 3.0 PCF Low GWP B Side

If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.

Wash skin with soap and water for 15 minutes. Get medical aid if symptoms persist. Use a rag to remove excess foam from skin and remove contaminated clothing. Use of a solvent, such as acetone (nail polish remover) or mineral spirits, may help in removing uncured foam residue from clothing or other surfaces (avoid eye contact). Cured foam may be physically removed by persistent washing with soap and water. If irritation develops, use mild skin cream. If irritation persists, obtain medical attention.

Symptoms: irritation

In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.

Symptoms: irritation

If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.

Alcohol Foam, Carbon Dioxide, Dry Chemical, Water Spray or Fog, Water

Closed containers may burst if exposed to extreme heat or fire. Containers may explode if exposed to extreme heat.

Use water spray to cool exposed surfaces.

Contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations. Use personal protective equipment as necessary. Read all product instructions before using. Uncured product is very sticky, so carefully remove the bulk of the foam by scraping it up and then immediately remove residue with a rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner, etc. Once the product has cured, it can only be removed physically by scraping, buffing, etc. Spilled material becomes very slippery when wet. Sweep-up to prevent slipping hazard.

No Information

remove with inert absorbent, scraping it up, remove residue with a rag and solvent, scraping, buffing

Materials: inert absorbent, rag and solvent such as polyurethane cleaner, mineral spirits, acetone (nail polish remover), paint thinner

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Make sure nozzle is directed away from yourself prior to discharge. Keep away from open flames, hot surfaces and sources of ignition. Keep containers away from excessive heat and freezing. Keep containers away from moisture. Wear appropriate personal protection. Avoid breathing vapor and contact with eyes, skin and clothing. Use only with adequate ventilation. Wash thoroughly after handling. Do not re-use empty containers.

Keep containers tightly closed in a dry, cool and well-ventilated place. Store containers away from excessive heat and freezing. Protect material from direct sunlight.

Wash thoroughly after handling.

Keep away from open flames, hot surfaces and sources of ignition.

Stable under recommended storage conditions.

Excessive heat and freezing.

Incompatible with strong bases and oxidizing agents. Reacts with isocyanates.

Normal decomposition products, i.e., COx, NOx.