Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Power Point 210 Fast Dry White
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Caulking Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200, Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Medical/Poison Control
1-800-222-1222
Transportation/National Response Center
1-800-535-5053
Transportation/National Response Center
1-352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | No |
| Lubricating petroleum oil | 72623-86-0 | 3 - 7% | Yes |
| Petroleum distillates | 64741-88-4 | 1 - 5% | No |
| Solvent ref. light paraffinic | 64741-89-5 | 1 - 5% | Yes |
| Glycol ethers | --- | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Material is not likely to present an inhalation hazard at ambient conditions. Leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.
Symptoms: difficulty in breathing
In case of contact, wash skin immediately with soap and water.
In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides. Get medical attention immediately.
Symptoms: irritation
If swallowed, DO NOT INDUCE VOMITING. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately if difficulty in breathing continues, if eye irritation persists, or if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
None Known.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Dispose of saturated absorbent or cleaning materials appropriately.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Scrape up dried material and place into containers.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Powerpoint 230 - White
---
PowerPoint 100 - White
---
Power Point 300 Advanced Acrylic Urethane Elastomeric Sealant - All Colors
---
PowerPoint 200 - White
---
Power Point 300 Advanced Acrylic Urethane Elastomeric Sealant - Clear
---
Power Point 200 Clear
---
PRO INDUSTRIAL™ Pre-Catalyzed Waterbased Epoxy Eg-Shel Extra White
---
MINWAX® Fast-Drying Polyurethane Spray Clear Gloss
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Wash thoroughly after handling.
Avoid excessive heat and freezing. Store away from caustics and oxidizers.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Excessive heat and freezing.
strong bases and oxidizing agents.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Power Point 210 Fast Dry White?
The signal word is no signal word.
What is the physical form of Power Point 210 Fast Dry White?
Power Point 210 Fast Dry White is a paste appearing as white to off-white . It has slight odor.
What is Power Point 210 Fast Dry White used for?
Caulking Compound