Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Blockade Fire-Rated Intumescent Acrylic Latex Sealant
- Product Code
- 070798188587
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Caulking Compound
Manufacturers & Suppliers
DAP Global Inc.
manufacturer
2400 Boston Street Suite 200 Baltimore, MD 21224-4723
888-327-8477
Emergency Contacts
Emergency Contact
1-800-535-5053
Emergency Contact
1-352-323-3500
Emergency Contact
1-800-222-1222
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyphosphoric acids, ammonium salts | 68333-79-9 | 7 - 13% | Yes |
| Zinc borate | 1332-07-6 | 7 - 13% | Yes |
| Graphite | 7782-42-5 | 5 - 10% | Yes |
| Limestone | 1317-65-3 | 3 - 7% | Yes |
| Soda lime borosilicate glass | 65997-17-3 | 3 - 7% | Yes |
| Propylene glycol | 57-55-6 | 1 - 5% | Yes |
| Sulfuric acid | 7664-93-9 | 1 - 5% | Yes |
| Silica, crystalline | 14808-60-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If you experience difficulty in breathing, leave the area to obtain fresh air.
In case of contact, wash skin immediately with soap and water.
In case of contact, immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.
If swallowed, DO NOT INDUCE VOMITING.
Immediate Medical Attention
Get medical attention immediately if continued difficulty is experienced (inhalation), or if contact occurs (eye/ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog, Water
None Known.
Use water spray to cool exposed surfaces.
Firefighter Protection
Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as necessary. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations. Scrape up dried material and place into containers.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Dispose of saturated absorbent or cleaning materials appropriately. Local, state and federal laws and regulations may apply to releases and disposal of this material, as well as those materials and items employed in the cleanup of releases.
Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate. Scrape up dried material and place into containers.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Touch N Seal FireBlock Flame Resistant PU Foam Sealant
---
Touch N Foam FireBreak Flame Resistant PU Foam Sealant
---
Barrier Multi-Project Foam Sealant
---
Alex Painters Acrylic Latex Caulk
---
Fire Stop Silicone Sealant
---
FIRETEX FX2003 Solvent Based Intumescent
---
DOWSIL™ Firestop 700 Sealant Black
---
FIRETEX FX1002 Solvent Based Intumescent
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Use only with adequate ventilation. Ensure fresh air entry during application and drying. Wash thoroughly after handling.
Avoid excessive heat and freezing. Store away from caustics and oxidizers.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Excessive heat and freezing.
Incompatible with strong bases and oxidizing agents.
Normal decomposition products, i.e., COx, NOx.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not Regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Blockade Fire-Rated Intumescent Acrylic Latex Sealant?
The signal word is danger.
What is the physical form of Blockade Fire-Rated Intumescent Acrylic Latex Sealant?
Blockade Fire-Rated Intumescent Acrylic Latex Sealant is a solid appearing as paste with red color. It has very slight ammonia odor.
What is Blockade Fire-Rated Intumescent Acrylic Latex Sealant used for?
Caulking Compound
What are the hazard statements for Blockade Fire-Rated Intumescent Acrylic Latex Sealant?
This substance has 6 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H350: May cause cancer.
- H361: Suspected of damaging fertility or the unborn child.
- H373: May cause damage to organs through prolonged or repeated exposure.