NextSDS Logo
Safety Data Sheet EN

Plastic Wood 3 IN 1 Repair Stick Marker All Colors

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Plastic Wood 3 IN 1 Repair Stick Marker All Colors
Product Code
070798040908, 070798040915, 070798040922, 070798040939, 070798040946, 070798040953, 070798040960

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Wood Stain Pen

Manufacturers & Suppliers

D

DAP Global Inc.

manufacturer

2400 Boston Street Suite 200 Baltimore, MD 21224-4723

888-327-8477

Emergency Contacts

Emergency Contact

1-800-535-5053

Emergency Contact

1-352-323-3500

Emergency Contact

1-800-222-1222

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Eye Dam. Cat. 1
Flam. Liq. Cat. 2
Skin Irrit. Cat. 2
STOT RE Cat. 2
STOT SE Cat. 3
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/../ equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/physician.
P321 Specific treatment (see ... on this label).
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P362 Take off contaminated clothing.
P370 + P378 In case of fire: Use... to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethyl alcohol 64-17-5 30 - 60% Yes
Toluene 108-88-3 10 - 30% Yes
n-Butyl alcohol 71-36-3 10 - 30% Yes
Propylene glycol monomethyl ether acetat 108-65-6 10 - 30% Yes
Hydrotreated kerosene 64742-47-8 1 - 5% Yes
Isopropyl alcohol 67-63-0 1 - 5% Yes
Ethylcellulose 9004-57-3 1 - 5% No
Dipropylene glycol methyl ether 34590-94-8 0.5 - 1.5% No
Amines, C12-14-tert-alkyl, compounds with 1-[[5-(1,1-dimethylpropyl)-2-hydroxy-3-nitrophenyl]azo]-2-naphthalenol 1-[[2-hydroxy-4(or 5)-nitrophenyl]azo]-2-naphthalenol chromium complexes 117527-94-3 0.5 - 1.5% No
Diarylide yellow 5567-15-7 0.5 - 1.5% Yes
Ethyl benzene 100-41-4 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from exposure to fresh air.

Skin contact

Wash off with soap and water.

Eye contact

Immediately flush eyes with large quantities of water for at least 15 minutes until irritation subsides.

Ingestion

If swallowed, do not induce vomiting.

Immediate Medical Attention

Get medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Foam, Carbon Dioxide, Dry Chemical, Foam, Water Spray or Fog

Specific hazards

Extremely Flammable! Eliminate sources of ignition: heat, electrical equipment, sparks and flames. Vapors can form an ignitable mixture with air. Vapors can flow along surfaces to a distant ignition source and flash back. Vapors may form explosive mixtures with air. Store away from caustics and oxidizers. Containers may explode if exposed to extreme heat. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion.

Instructions

Use water spray to cool exposed surfaces. Flammable. Cool fire-exposed containers using water spray.

Firefighter Protection

Wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Review fire hazards before proceeding with clean up. Immediately eliminate sources of ignition. Keep people away from and upwind of spill/leak.

Environmental

Prevent product from entering drains.

Cleanup methods

Soak up with inert absorbent material and dispose of as hazardous waste. Scrape up dried material and place into containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

KEEP OUT OF REACH OF CHILDREN! DO NOT TAKE INTERNALLY. Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid breathing vapors. Provide adequate ventilation. Avoid heat, sparks and open flames. Wear appropriate personal protection. Use in well ventilated area. Empty containers retain product residue (liquid and/or vapor). Vapor can ignite potentially causing an explosion. Do not use in areas where static sparks may be generated.

Storage

Store away from sources of ignition and heat. Keep away from heat and sources of ignition. Do not store at temperatures above 120 °F (49 °C). Store containers away from excessive heat and freezing. Store away from caustics and oxidizers. Keep containers tightly closed.

Hygiene

DO NOT TAKE INTERNALLY.

Fire prevention

Remove all sources of ignition. Keep away from open flames, hot surfaces and sources of ignition. Avoid heat, sparks and open flames. Do not use in areas where static sparks may be generated.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
0.85 - 1.16 g/cm3
Evaporation Rate
Not Established
Kinematic Viscosity
---
Flammability
Flammable Liquid Class IB
Solubility In Fat
---
State Under Standard Conditions
---
Auto Ignition Temperature
Not Established
Metal Corrosion
---
Vapor Density
Not Established
Crystallisation Point
---
Vapor Pressure
Not Established
Decomposition Temperature
Not Established
Lower Explosive Limit
N.E.
Relative Evaporation Rate
---
Solubility
---
Physical State
Liquid
Dynamic Viscosity
Not Established
Odor Threshold
Not Established
Colour
---
Solubility In Water
Not Established
Colour Intensity
---
Partition Coefficient
Not Established
Relative Density
---
Voc Content
---
Appearance
Colored
Odor
Slight Solvent
Bulk Density
---
Upper Explosive Limit
N.E.
Ph
Not Applicable
Molecular Weight
---
Physical State Data
liquid
Freezing Point
Not Established
Properties Status
---
Explosive Limits
---
Cloud Point
---
Melting Point
---
Solidification Point
---
Form
---
Softening Point
---
Flash Point
Pensky-Martens Closed Cup: 12.8 °C
Boiling Point
78.3 - 78.3 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Hazardous reactions

exothermic reactions

Avoid

Excessive heat and freezing. Keep away from open flames, hot surfaces and sources of ignition. Do not smoke.

Incompatible

oxidizing agents, strongly alkaline and strongly acid materials, strong bases

Decomposition

Normal decomposition products, i.e., COx, NOx.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1993
Shipping Name
Flammable liquids, n.o.s.
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Plastic Wood 3 IN 1 Repair Stick Marker All Colors?

The signal word is danger.

What is the physical form of Plastic Wood 3 IN 1 Repair Stick Marker All Colors?

Plastic Wood 3 IN 1 Repair Stick Marker All Colors is a liquid appearing as colored . It has slight solvent odor.

What is Plastic Wood 3 IN 1 Repair Stick Marker All Colors used for?

Wood Stain Pen

What are the hazard statements for Plastic Wood 3 IN 1 Repair Stick Marker All Colors?

This substance has 7 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.
  • H336: May cause drowsiness or dizziness.
  • H373: May cause damage to organs through prolonged or repeated exposure.