NextSDS Logo
Safety Data Sheet EN

LOCTITE MF R301 known as MFR301 5 GALLON

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE MF R301 known as MFR301 5 GALLON
Product Form
Liquid
Product Code
511510

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Liquid Flux

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelina.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOUR.
H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H318 CAUSES SERIOUS EYE DAMAGE.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-Propanol 67-63-0 80 - 100% Yes
Solvent naphtha (petroleum), medium aliph. 64742-88-7 10 - 30% Yes
Glutaric acid 110-94-1 1 - 5% Yes
rosin 8050-09-7 1 - 5% Yes
adipic acid 124-04-9 1 - 5% Yes

Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.

Skin contact

Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Immediate Medical Attention

Get medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Vapors may form explosive mixtures with air.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate area. Remove all sources of ignition. Evacuate personnel to safe areas. Wear suitable protective clothing, gloves and eye/face protection. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from heat, spark and flame. Wear suitable protective clothing, gloves and eye/face protection. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Keep container closed. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.

Storage

Store away from ignition sources. Keep away from heat, spark and flame. Store in original container until ready to use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat, spark and flame. Store away from ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Colour
Light yellow
Solidification Point
---
Upper Explosive Limit
Not available.
Kinematic Viscosity
Not available.
Lower Explosive Limit
Not available.
Relative Density
0.801
Physical State Data
liquid
Auto Ignition Temperature
Not available.
Melting Point
Not determined
Flash Point
14 °C (57.2 °F)
Odor Threshold
Not available.
State Under Standard Conditions
---
Odor
Alcoholic
Properties Status
---
Physical State
Liquid
Cloud Point
---
Ph
Not applicable, Product is non-soluble (in water).
Flammability
Not applicable
Vapor Density
---
Partition Coefficient
Not determined
Solubility In Water
---
Molecular Weight
---
Boiling Point
82 °C (179.6 °F)
Metal Corrosion
---
Colour Intensity
---
Evaporation Rate
2.93 (Butyl acetate = 1)
Dynamic Viscosity
1.0 mPa.s
Appearance
---
Vapor Pressure
6.6 kPa (25 °C (77°F))
Density
---
Freezing Point
---
Solubility
Soluble Water
Bulk Density
---
Voc Content
93 %; 744 g/l
Softening Point
---
Relative Evaporation Rate
---
Decomposition Temperature
Not available.
Solubility In Fat
---
Crystallisation Point
---
Form
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions. Electrostatic charge may build-up during handling. Grounding of equipment is recommended.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from open flames, hot surfaces and sources of ignition. Store away from incompatible materials. Avoid moisture.

Incompatible

Oxidizing agents. Reducing agents. Acids and bases. Amines. Metals. Peroxides. Dissolves aluminium and zinc slowly with formation of hydrogen. Water.

Decomposition

Oxides of carbon. Oxides of nitrogen. Oxides of sulfur. Formaldehyde. Hydrocarbons. Thermal decomposition can lead to release of irritating gases and vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
Flammable liquids, n.o.s. (Isopropanol, Naphtha)
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE MF R301 known as MFR301 5 GALLON?

The signal word is danger.

What is the physical form of LOCTITE MF R301 known as MFR301 5 GALLON?

LOCTITE MF R301 known as MFR301 5 GALLON is a liquid with light yellow color. It has alcoholic odor.

What is the solubility of LOCTITE MF R301 known as MFR301 5 GALLON?

Soluble Water

What is LOCTITE MF R301 known as MFR301 5 GALLON used for?

Liquid Flux

What are the hazard statements for LOCTITE MF R301 known as MFR301 5 GALLON?

This substance has 6 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H318: CAUSES SERIOUS EYE DAMAGE.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of LOCTITE MF R301 known as MFR301 5 GALLON?

The melting point is Not determined and the boiling point is 82 °C (179.6 °F).