NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AK EC-76 ALKALINE CLEANER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AK EC-76 ALKALINE CLEANER
Product Code
595576
Synonyms
PARCO CLEANER EC-76

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Skin Corr. Cat. 1
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

Precautionary Statements

P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 30 - 60% Yes
Surfactant 61702-77-0 1 - 5% Yes
Disodium pyrophosphate 7758-16-9 1 - 5% Yes
Trisodium orthophosphate 7601-54-9 1 - 5% Yes
Sodium chloride 7647-14-5 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air.

Skin contact

Wash affected area immediately with soap and water.

Eye contact

Rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. For industrial use only. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Manufacturer recommends storing above 4.4 °C (40 °F).

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Partition Coefficient
Not available.
Metal Corrosion
---
Solidification Point
---
Appearance
---
Bulk Density
---
Colour Intensity
---
Upper Explosive Limit
Not applicable
State Under Standard Conditions
---
Solubility In Water
---
Melting Point
Not determined, Aqueous solution
Decomposition Temperature
Not available.
Solubility In Fat
---
Lower Explosive Limit
Not applicable
Evaporation Rate
Not available.
Kinematic Viscosity
Not available.
Colour
Off white
Physical State Data
liquid
Molecular Weight
---
Voc Content
Not available.
Explosive Limits
---
Softening Point
---
Relative Density
1.45 - 1.55
Ph
13.2 (6% solution)
Cloud Point
---
Dynamic Viscosity
Not available.
Properties Status
---
Density
---
Flash Point
Not applicable
Boiling Point
> 100 °C (> 212°F)
Odor
Soap-like
Odor Threshold
Not available.
Solubility
Complete
Vapor Pressure
Not determined
Relative Evaporation Rate
---
Crystallisation Point
---
Physical State
Liquid
Flammability
Not applicable
Form
---
Vapor Density
---
Auto Ignition Temperature
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product reacts with acids.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE C-AK EC-76 ALKALINE CLEANER known by?

BONDERITE C-AK EC-76 ALKALINE CLEANER is also known as: PARCO CLEANER EC-76

What is the hazard signal word for BONDERITE C-AK EC-76 ALKALINE CLEANER?

The signal word is danger.

What is the physical form of BONDERITE C-AK EC-76 ALKALINE CLEANER?

BONDERITE C-AK EC-76 ALKALINE CLEANER is a liquid with off white color. It has soap-like odor.

What is the solubility of BONDERITE C-AK EC-76 ALKALINE CLEANER?

Complete

What is BONDERITE C-AK EC-76 ALKALINE CLEANER used for?

Cleaner

What are the hazard statements for BONDERITE C-AK EC-76 ALKALINE CLEANER?

This substance has 2 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.

What is the melting point of BONDERITE C-AK EC-76 ALKALINE CLEANER?

The melting point is Not determined, Aqueous solution and the boiling point is > 100 °C (> 212°F).