Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON RB 22100 C1 B0109900009
- Product Code
- 2865880
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum resins | 64742-16-1 | 10 - 30% | Yes |
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 10 - 30% | Yes |
| Talc | 14807-96-6 | 10 - 30% | Yes |
| C,C'-azodi(formamide) | 123-77-3 | 5 - 10% | Yes |
| Petroleum distillates, hydrotreated, light naphthenic | 64742-53-6 | 1 - 5% | Yes |
| Zinc oxide | 1314-13-2 | 1 - 5% | Yes |
| Carbon black | 1333-86-4 | 1 - 5% | Yes |
| 4,4'-Oxydi(benzenesulphonohydrazide) | 80-51-3 | 1 - 5% | Yes |
| Tetramethylthiuram disulfide | 137-26-8 | 0.1 - 1% | Yes |
| di(benzothiazol-2-yl) disulphide | 120-78-5 | 0.1 - 1% | Yes |
| Quartz (SiO2) respirable particulates (RCS) >=10% | 14808-60-7 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
TEROSON RB 22100 C1 B0109900009 D
---
TEROSON RB 22100 C1 B0200900023 A
---
TEROSON RB 10104 C1 B0109900009
---
TEROSON RB 10104 C1 B0109900009
---
TEROSON RB 10104 C1 B0109900015
---
TEROSON RB 22100 ET76-A24209AC
---
TEROSON RB 22100 BK21 V111C28
---
TEROSON RB 10104 C1 B0109900049 A
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. Do not take internally. For industrial use only.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON RB 22100 C1 B0109900009?
The signal word is danger.
What is the physical form of TEROSON RB 22100 C1 B0109900009?
TEROSON RB 22100 C1 B0109900009 is a solid with black color. It has mild odor.
What is the solubility of TEROSON RB 22100 C1 B0109900009?
Insoluble Water
What is TEROSON RB 22100 C1 B0109900009 used for?
Sealant
What are the hazard statements for TEROSON RB 22100 C1 B0109900009?
This substance has 5 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON RB 22100 C1 B0109900009?
The melting point is > 200 °C (> 392°F) and the boiling point is Not applicable, Polymerizes before boiling point is reached..