NextSDS Logo
Safety Data Sheet EN

LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"
Product Code
3007602

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Conductive dry film product

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Carc. Cat. 2
Repr. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.
H351 SUSPECTED OF CAUSING CANCER.
H361 SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Silver 7440-22-4 80 - 100% Yes
Butadiene, acrylonitrile polymer, carboxy-terminated, polymer with bisphenol A and epichlorohydrin 68610-41-3 5 - 10% Yes
CP Bisphenol A Diglycidylether 25036-25-3 5 - 10% Yes
Methyl isobutyl ketone 108-10-1 1 - 5% Yes
Epichlorohydrin-4,4'-isopropylidene diphenol resin 25068-38-6 1 - 5% Yes
tetrahydrofuran 109-99-9 0.1 - 1% Yes
Modified Epoxy Resin~ --- 0.1 - 1% Yes
Reaction product: bisphenol-A-(epichlorohydrin); epoxy resin (number average molecular weight 700-1100) 25068-38-6 0.1 - 1% Yes
4,4'-Isopropylidenediphenol 80-05-7 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Skin contact

Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). Get medical attention. Wash clothing before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Not available.

Medical Treatment

Not available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Sweep up or gather material and place in appropriate container for disposal.

Materials: appropriate container

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.

Storage

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep in a cool, well ventilated area away from heat, sparks and open flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
> 100 °C (> 212°F)
Relative Evaporation Rate
---
Relative Density
3.9
Vapor Pressure
< 1 mbar (20 °C (68°F))
Voc Content
< 1 % (by weight)
Decomposition Temperature
> 175 °C
Odor
Slight
Bulk Density
---
Evaporation Rate
Not determined
Solubility
Insoluble Water
Flammability
Noncombustible Solid in bulk form
State Under Standard Conditions
---
Physical State Data
solid
Molecular Weight
---
Odor Threshold
Not available.
Physical State
Film, Solid
Boiling Point
Not applicable, Polymerizes before boiling point is reached.
Partition Coefficient
Not available.
Solubility In Fat
---
Form
---
Metal Corrosion
---
Auto Ignition Temperature
Not available.
Crystallisation Point
---
Colour Intensity
---
Colour
Gray / Grey
Explosive Limits
---
Upper Explosive Limit
Not available.
Ph
Not applicable, Product is non-soluble (in water).
Solidification Point
---
Vapor Density
---
Melting Point
Not applicable, Determination technically not possible
Density
---
Lower Explosive Limit
Not available.
Freezing Point
---
Properties Status
---
Cloud Point
---
Solubility In Water
Insoluble
Appearance
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Softening Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.

Avoid

Extremes of temperature and direct sunlight. Avoid moisture. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.

Incompatible

Oxidizing agents. Reducing agents. Acids and bases. Amines. Alkalis. Metals.

Decomposition

Oxides of carbon. Oxides of nitrogen. Metal oxide fumes. Cyanides. Ammonia. Hydrocarbons. Toxic fumes. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
RQ, Environmentally hazardous substance, solid, n.o.s.
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"?

The signal word is warning.

What is the physical form of LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"?

LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302" is a film, solid with gray / grey color. It has slight odor.

What is the solubility of LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"?

Insoluble Water

What is LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302" used for?

Conductive dry film product

What are the hazard statements for LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"?

This substance has 5 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H351: SUSPECTED OF CAUSING CANCER.
  • H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.

What is the melting point of LOCTITE ABLESTIK CF 3350-004 5.895" X 5.302"?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Polymerizes before boiling point is reached..