Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)
- Product Code
- 1346125
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silver | 7440-22-4 | 80 - 100% | Yes |
| Epoxy resin | --- | 5 - 10% | Yes |
| Epoxy resin | --- | 1 - 5% | Yes |
| Reaction mass of 2-ethyl-4-methyl-1H-imidazole-1-propiononitrile and 2-ethyl-5-methyl-1H-imidazole-1-propiononitrile | 568591-00-4 | 1 - 5% | Yes |
IDH number: 1346125 Product name: LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
This product is combustible at high temperatures. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a partly filled, closed container until disposal.
Materials: Inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 968-2 known as Ablebond 968-2 (1.8g)
---
LOCTITE ABLESTIK 965-1F known as Ablebond 965-1F (15g)
---
LOCTITE ABLESTIK 958-7 known as Ablebond 958-7 (5011) (4.5g)
---
LOCTITE ABLESTIK 958-2 known as Ablebond 958-2 (15g)
---
LOCTITE ABLESTIK 8351C known as Ablebond 8351C (17.5g)
---
LOCTITE ABLESTIK 967-1 known as Ablebond 967-1 (2.8g), Epoxy adhesive
---
LOCTITE ABLESTIK 8175H known as Ablebond 8175H (113.2g)
---
LOCTITE ABLESTIK 8390 known as Ablebond 8390 (34g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed.
Store at or below -40.0 °C (-40°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep container dry. Keep away from heat, spark and flame. Protect from direct sunlight.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Hazardous polymerization can occur.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Avoid moisture. Exposure to air.
Strong oxidizing agents. Strong acids and strong bases. Water Air. Amines. Strong alkalis.
Oxides of carbon. Oxides of nitrogen. Oxides of Metals in Section 3. Aldehydes. Ammonia. Hydrogen cyanide. Ketones. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)?
LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g) is a liquid, paste with silver color. It has slight odor.
What is LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g) used for?
Epoxy adhesive
What are the hazard statements for LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)?
The melting point is Not applicable, Product is a liquid and the boiling point is > 200 °C (> 392°F) Polymerizes before boiling point is reached..