Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON PV 4710
- Product Code
- 2550604
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesive and sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 10 - 30% | No |
| Calcium carbonate | 471-34-1 | 10 - 30% | No |
| Polyvinyl chloride | 9002-86-2 | 10 - 30% | No |
| Epoxy resin | --- | 5 - 10% | No |
| CP Styrene, butadiene, divinylbenzene | --- | 1 - 5% | No |
| Sodium silicate | 1344-09-8 | 1 - 5% | No |
| Zinc oxide | 1314-13-2 | 0.1 - 1% | No |
| Disodium disulphite | 7681-57-4 | 0.1 - 1% | No |
| Sodium dodecyl sulphate | 151-21-3 | 0.1 - 1% | No |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
None expected.
Wear full protective clothing. Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
Not available.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Avoid excessive heat and ignition sources.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Heat and processing may result in the release of low levels of vinyl chloride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON PV 4710?
The signal word is danger.
What is the physical form of TEROSON PV 4710?
TEROSON PV 4710 is a liquid with beige color. It has mild odor.
What is TEROSON PV 4710 used for?
adhesive and sealant
What are the hazard statements for TEROSON PV 4710?
This substance has 5 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON PV 4710?
The melting point is Not available. and the boiling point is Not applicable.