Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EP 20003 1.5X15X30MM
- Product Code
- 2211758
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| CP Bisphenol A Diglycidyl ether | 25036-25-3 | 10 - 30% | Yes |
| Wollastonite (Ca(SiO3)) | 13983-17-0 | 10 - 30% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 10 - 30% | Yes |
| CP Styrene, butadiene, divinylbenzene | --- | 1 - 5% | Yes |
| Fatty acids, C18-unsatd., dimers, polymers with epichlorohydrin | 68475-94-5 | 1 - 5% | Yes |
| Butadiene, acrylonitrile polymer, carboxy-terminated, polymer with bisphenol A and epichlorohydrin | 68610-41-3 | 1 - 5% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
IDH number: 2211758 Product name: TEROSON EP 20003 1.5X15X30MM
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
In case of contact with eyes, rinse immediately with plenty of water.
Do not induce vomiting.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. Seek medical advice. Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.
Not available.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Reaction with some curing agents may produce considerable heat. Run-a-way cure reactions (polymerization) may char and decompose the resin system. Fumes and vapors from these thermal and chemical decompositions vary widely in composition and toxicity. Avoid excessive heat and ignition sources.
This product may react with strong acids or oxidizing agents.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EP 20003 1.5X15X30MM?
The signal word is danger.
What is the physical form of TEROSON EP 20003 1.5X15X30MM?
TEROSON EP 20003 1.5X15X30MM is a solid with black color. It has mild odor.
What is TEROSON EP 20003 1.5X15X30MM used for?
Adhesive
What are the hazard statements for TEROSON EP 20003 1.5X15X30MM?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H350: MAY CAUSE CANCER.
What is the melting point of TEROSON EP 20003 1.5X15X30MM?
The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Polymerizes before boiling point is reached..