Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EP 5017 1TX26X26 EX
- Product Code
- 2729535
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
1-c- epoxide adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 20 - 30% | Yes |
| Calcium carbonate | 471-34-1 | 10 - 20% | Yes |
| CP Bisphenol A Diglycidylether | 25036-25-3 | 10 - 20% | Yes |
| 2-Propenenitrile, polymer with 1,3-butadiene, carboxy-terminated, polymers with bisphenol A and epichlorohydrin | 68610-41-3 | 10 - 20% | Yes |
| Wollastonite (Ca(SiO3)) | 13983-17-0 | 5 - 10% | Yes |
| Treated fumed silica | 67762-90-7 | 1 - 5% | Yes |
| Bisphenol A diglycidyl ether-bisphenol A copolymer | 25036-25-3 | 1 - 5% | Yes |
| Tris(methylphenyl) phosphate | 1330-78-5 | 0.1 - 1% | Yes |
| 4-Tert-butylphenol | 98-54-4 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Rinse immediately with plenty of running water.
Wash with plenty of water immediately and continue for several minutes, holding eyelid open.
Do not induce vomiting.
Immediate Medical Attention
Seek medical advice. Seek medical advice if necessary. Consult a doctor. Seek medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, carbon dioxide, foam, powder, Water spray jet
Not available.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure that workrooms are adequately ventilated. Avoid naked flames, sparking and sources of ignition. Avoid skin and eye contact.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Heat, flames, sparks and other sources of ignition.
Avoid skin and eye contact.
Avoid naked flames, sparking and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Heat, flames, sparks and other sources of ignition.
Not available.
None identified.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EP 5017 1TX26X26 EX?
The signal word is warning.
What is the physical form of TEROSON EP 5017 1TX26X26 EX?
TEROSON EP 5017 1TX26X26 EX is a solid with black color. It has epoxy odor.
What is TEROSON EP 5017 1TX26X26 EX used for?
1-c- epoxide adhesive
What are the hazard statements for TEROSON EP 5017 1TX26X26 EX?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of TEROSON EP 5017 1TX26X26 EX?
The melting point is Not available. and the boiling point is Not available..