NextSDS Logo
Safety Data Sheet EN

TEROSON RB II

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB II
Product Code
36774

Regulatory Identifiers

CAS Number
N/A

Identified Uses

1-Component sealant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Carc. Cat. 1A
STOT SE Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.
H335 MAY CAUSE RESPIRATORY IRRITATION.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P233 Keep container tightly closed.
P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P312 Call a POISON CENTER or physician if you feel unwell.
P337 + P313 If eye irritation persists: Get medical attention.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Talc 14807-96-6 30 - 60% No
Limestone 1317-65-3 10 - 30% No
Lubricating oils (petroleum), C20-50, hydrotreated neutral oil-based, <3% DMSO 72623-87-1 10 - 30% No
Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based, <3 % DMSO extract 72623-86-0 1 - 5% No
Dolomite 16389-88-1 1 - 5% No
Quartz (SiO2), <1% respirable 14808-60-7 0.1 - 1% No

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air, consult doctor if complaint persists.

Skin contact

Rinse with running water and soap. Apply replenishing cream. Change all contaminated clothing.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.

Ingestion

Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.

Immediate Medical Attention

Consult doctor if complaint persists (inhalation), seek medical attention if necessary (eye contact), consult a doctor (ingestion).

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear self-contained breathing apparatus. Wear protective equipment.

Firefighter Protection

Wear self-contained breathing apparatus. Wear protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Scrape up spilled material and place in a closed container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Store frost-free. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
dark grey
Colour Intensity
---
Form
---
Odor
odourless
Odor Threshold
Not available.
Ph
Not applicable, Product is non-soluble (in water).
Melting Point
Not applicable, Determination technically not possible
Boiling Point
Not applicable, Decomposes before boiling point is reached
Flash Point
Not available.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
< 1 hPa (20 °C (68°F))
Vapor Density
Not applicable, Product is a solid.
Relative Density
1.55
Bulk Density
---
Density
---
Flammability
non flammable
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not available.
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
0.00 %
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not available.

Hazardous reactions

None identified.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

None if used for intended purpose.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB II?

The signal word is danger.

What is the physical form of TEROSON RB II?

TEROSON RB II is a solid with dark grey color. It has odourless odor.

What is TEROSON RB II used for?

1-Component sealant

What are the hazard statements for TEROSON RB II?

This substance has 3 hazard statements:

  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON RB II?

The melting point is Not applicable, Determination technically not possible and the boiling point is Not applicable, Decomposes before boiling point is reached.