Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE PC 7234 HIGH TEMP BRUSH
- Product Code
- 1769991
- Synonyms
- Nord High Temp.Brushab cera H/F
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy Hardener
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4,4'-Methylenebis(cyclohexylamine) | 1761-71-3 | 30 - 60% | Yes |
| Formaldehyde, polymer with benzenamine, hydrogenated | 135108-88-2 | 30 - 60% | Yes |
| 2,4,6-tris(dimethylaminomethyl)phenol | 90-72-2 | 5 - 10% | Yes |
| 4-nonylphenol, branched | 84852-15-3 | 1 - 5% | Yes |
| N-(3-(Trimethoxysilyl)propyl)ethylenediamine | 1760-24-3 | 0.1 - 1% | Yes |
| Phenol, 2-nonyl-, branched | 91672-41-2 | 0.1 - 1% | Yes |
| Dinonylphenol | 1323-65-5 | 0.1 - 1% | Yes |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Burning produces obnoxious and toxic fumes. Personnel in vicinity and downwind should be evacuated. Use of water may result in the formation of very toxic aqueous solutions.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not taste or swallow. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Store in original container until ready to use. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local exhaust ventilation if the potential for airborne exposure exists.
Use chemical resistant, impermeable gloves.
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use a NIOSH approved respirator if ventilation is inadequate.
Use chemical resistant, impermeable clothing including an apron or body suit to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
Strong acids. Strong oxidizing agents. Peroxides. Sodium hypochlorite. This product slowly corrodes copper, aluminum, zinc and galvanized surfaces.
Oxides of carbon. Oxides of nitrogen. Ammonia. Nitric acid. Toxic fumes. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2735
- Shipping Name
- Amines, liquid, corrosive, n.o.s. (cycloaliphatic amine, 4,4-methylenebis-cyclohexylamine)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE PC 7234 HIGH TEMP BRUSH known by?
LOCTITE PC 7234 HIGH TEMP BRUSH is also known as: Nord High Temp.Brushab cera H/F
What is the hazard signal word for LOCTITE PC 7234 HIGH TEMP BRUSH?
The signal word is danger.
What is the physical form of LOCTITE PC 7234 HIGH TEMP BRUSH?
LOCTITE PC 7234 HIGH TEMP BRUSH is a viscous, liquid with amber color. It has ammoniacal odor.
What is the solubility of LOCTITE PC 7234 HIGH TEMP BRUSH?
Insoluble Water
What is LOCTITE PC 7234 HIGH TEMP BRUSH used for?
Epoxy Hardener
What are the hazard statements for LOCTITE PC 7234 HIGH TEMP BRUSH?
This substance has 4 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE PC 7234 HIGH TEMP BRUSH?
The melting point is Not applicable, Product is a liquid and the boiling point is > 250 °C (> 482°F).