Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP
- Product Code
- 1695850
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Conversion coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphoric acid | 7664-38-2 | 30 - 60% | Yes |
| Nickel bis(dihydrogen phosphate) | 18718-11-1 | 1 - 5% | Yes |
| Ferric nitrate | 10421-48-4 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air.
Immediately flush with large quantities of water for at least 15 minutes. Remove contaminated clothing.
Rinse immediately with plenty of water for 15 minutes.
DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). GET MEDICAL ATTENTION (skin). Seek immediate medical attention (eye). Seek medical advice (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
This product is an aqueous mixture which will not burn.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-ZN 3958 MU ZINC PHOSPHATE MAKE UP
---
BONDERITE M-ZN 11 MU ZINC PHOSPHATE MAKE UP
---
BONDERITE M-ZN 1421-A R ZINC PHOSPHATE
---
BONDERITE M-ZN 2030 R MU ZINC PHOSPHATE
---
BONDERITE M-ZN 3410 R I ZINC PHOSPHATE known as BONDERITE 3410 REPL I
---
BONDERITE M-ZN 1048JJ ZINC PHOSPHATE known as 1048 JJ
---
BONDERITE M-ZN 958 R Q3 IBC1709KG ZINC PHOSPHATE
---
BONDERITE M-ZN 3157MY ZINC PHOSPHATE known as BONDERITE 3157MY
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use caution when combining with water; DO NOT add water to acid, ALWAYS add acid to water while stirring to prevent release of heat, steam and fumes. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
This product may react with strong alkalies. Adding water to this product may cause localized overheating and splattering.
None expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1805
- Shipping Name
- Phosphoric acid solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP?
The signal word is danger.
What is the physical form of BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP?
BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP is a liquid with light green color. It has acidic odor.
What is the solubility of BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP?
Complete
What is BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP used for?
Conversion coating
What are the hazard statements for BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP?
This substance has 6 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H350: MAY CAUSE CANCER.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE M-ZN 958 MU ZINC PHOSPHATE known as BONDERITE 958 MAKE UP?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.