Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX
- Product Code
- 3019456
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
hotmelt, based on rubber
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isoprene-Styrene copolymer | 25038-32-8 | 10 - 30% | Yes |
| Distillates (petroleum), hydrotreated heavy naphthenic | 64742-52-5 | 10 - 30% | Yes |
| White mineral oil (petroleum) | 8042-47-5 | 5 - 10% | Yes |
IDH number: 3019456 Product name: TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove victim to fresh air. Get immediate medical attention.
Cool melted product on skin with plenty of water. Do not remove solidified product. No attempt should be made to remove material from skin or to remove contaminated clothing as damaged skin can be easily torn. Cover affected areas with clean sheeting or gauze and seek immediate medical attention.
Symptoms: Molten adhesive may cause severe burns.
If eye contact occurs with molten material immediately cool with water. Do not remove adhesive. Seek medical attention.
Ingestion of solid adhesive is not expected to be hazardous. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures appropriate to local circumstances and the surrounding environment. Dry chemical. Carbon dioxide.
Not available.
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA). Wear full protective clothing.
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA). Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
No special environmental precautions required. Do not allow material to contaminate ground water system.
Spilled material will solidify. Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
TECHNOMELT DM 4705 BX-EMF 1KG DISPOMELT
---
TECHNOMELT DM 897BTF BX-EMF-1KG DISPOMELT
---
TECHNOMELT DM 901M BX-EMF 1KG EASYMELT
---
TECHNOMELT PS 2025 NA BX- EMF 1KG
---
TECHNOMELT DM 901 MTF BX-EMF 1KG EASYMELT
---
TECHNOMELT EPIX 4144 BX-EMF1KG
---
TECHNOMELT GA 007A BX-EMM 15KG
---
TECHNOMELT DM 3400 DISPOMELT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always be careful around molten material. Avoid skin contact with molten resins. Follow suggested application temperature. Do not wear contact lenses. At elevated temperatures, irritating fumes may be emitted.
Store in sealed original container. Store in a dry place.
Do not wear contact lenses.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
To avoid thermal decomposition, do not overheat. Avoid temperatures above 200°C (392°F).
Oxidizing agents.
Thermal decomposition can lead to release of irritating gases and vapors. carbon monoxide carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX?
The signal word is danger.
What is the physical form of TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX?
TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX is a solid with light yellow color. It has hydrocarbons odor.
What is the solubility of TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX?
Not available.
What is TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX used for?
hotmelt, based on rubber
What are the hazard statements for TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX?
This substance has 1 hazard statement:
- H314: MOLTEN ADHESIVE MAY CAUSE SEVERE BURNS. VAPORS ABOVE MOLTEN ADHESIVE MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. STATIC CHARGES GENERATED BY EMPTYING PACKAGE IN OR NEAR FLAMMABLE VAPORS MAY CAUSE IGNITION.
What is the melting point of TECHNOMELT DF 8045M BX-EMF 1KG DISPOFIX?
The melting point is Not available. and the boiling point is Not available..