NextSDS Logo
Safety Data Sheet EN

TEROSON EV 6059 4N0.805.143.D

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON EV 6059 4N0.805.143.D
Product Form
Sound deadening compound
Product Code
2218394

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Resp. Sens. Cat. 1
Skin Sens. Cat. 1
Carc. Cat. 2

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H351 SUSPECTED OF CAUSING CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust or fumes.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethene, homopolymer 9002-88-4 1 - 5% Yes
C,C'-azodi(formamide) 123-77-3 1 - 5% Yes
Talc 14807-96-6 1 - 5% Yes
Propylidynetrimethyl trimethacrylate 3290-92-4 1 - 5% Yes
4,4'-Oxydi(benzenesulphonohydrazide) 80-51-3 1 - 5% Yes
Vinyl acetate 108-05-4 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air in case of accidental inhalation of dust or fumes from overheating or combustion.

Skin contact

Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

None identified.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Lower Explosive Limit
Not available.
Solubility In Water
---
Colour Intensity
---
Freezing Point
---
Explosive Limits
---
Relative Density
0.9700
Solubility In Fat
---
Voc Content
0.00 %
Molecular Weight
---
Physical State
Solid
State Under Standard Conditions
---
Softening Point
---
Melting Point
95 °C (203°F)
Appearance
---
Flash Point
Not applicable
Relative Evaporation Rate
---
Density
---
Upper Explosive Limit
Not available.
Evaporation Rate
Not available.
Physical State Data
solid
Partition Coefficient
Not available.
Ph
Product is non-soluble (in water), Not applicable
Auto Ignition Temperature
Not available.
Flammability
The product is not flammable.
Cloud Point
---
Odor Threshold
Not available.
Decomposition Temperature
> 250 °C
Properties Status
---
Form
---
Bulk Density
---
Metal Corrosion
---
Boiling Point
Not applicable, Polymerizes before boiling point is reached.
Vapor Density
---
Kinematic Viscosity
Not available.
Dynamic Viscosity
Not available.
Solubility
Insoluble Water
Odor
Mild, Acetate
Vapor Pressure
< 0.1 hPa (20 °C (68°F))
Solidification Point
---
Colour
Yellow
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

None identified.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON EV 6059 4N0.805.143.D?

The signal word is danger.

What is the physical form of TEROSON EV 6059 4N0.805.143.D?

TEROSON EV 6059 4N0.805.143.D is a solid with yellow color. It has mild, acetate odor.

What is the solubility of TEROSON EV 6059 4N0.805.143.D?

Insoluble Water

What are the hazard statements for TEROSON EV 6059 4N0.805.143.D?

This substance has 3 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H351: SUSPECTED OF CAUSING CANCER.

What is the melting point of TEROSON EV 6059 4N0.805.143.D?

The melting point is 95 °C (203°F) and the boiling point is Not applicable, Polymerizes before boiling point is reached..