NextSDS Logo
Safety Data Sheet EN

TEROSON EP 5017 1TX20X25 D240

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON EP 5017 1TX20X25 D240
Product Code
2575718

Regulatory Identifiers

CAS Number
N/A

Identified Uses

1-c- epoxide adhesive

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H319 CAUSES SERIOUS EYE IRRITATION.

Precautionary Statements

P261 Avoid breathing dust or fumes.
P264 Wash affected area thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 Take off contaminated clothing.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Epichlorohydrin-4,4'-isopropylidene diphenol resin 25068-38-6 20 - 30% No
Calcium carbonate 471-34-1 10 - 20% No
CP Bisphenol A Diglycidylether 25036-25-3 10 - 20% No
2-Propenenitrile, polymer with 1,3-butadiene, carboxy-terminated, polymers with bisphenol A and epichlorohydrin 68610-41-3 10 - 20% No
Wollastonite (Ca(SiO3)) 13983-17-0 5 - 10% No
Treated fumed silica 67762-90-7 1 - 5% No
Bisphenol A diglycidyl ether-bisphenol A copolymer 25036-25-3 1 - 5% No
Tris(methylphenyl) phosphate 1330-78-5 0.1 - 1% No
4-Tert-butylphenol 98-54-4 0.1 - 1% No

Notes

Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Seek medical advice.

Skin contact

Rinse immediately with plenty of running water, seek medical advice if necessary.

Eye contact

Wash with plenty of water immediately and continue for several minutes, holding eyelid open. Consult a doctor.

Ingestion

Do not induce vomiting. Seek medical attention immediately.

Immediate Medical Attention

Seek medical attention immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water, carbon dioxide, foam, powder

Unsuitable media

Water spray jet

Specific hazards

Not available.

Instructions

Wear self-contained breathing apparatus. Wear full protective clothing.

Firefighter Protection

Wear self-contained breathing apparatus. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid skin and eye contact.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Fire prevention

Avoid naked flames, sparking and sources of ignition. Keep away from heat, flames, sparks and other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
black
Colour Intensity
---
Form
---
Odor
Epoxy
Odor Threshold
Not available.
Ph
Not available.
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
1.3700 Approximately
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not available.
Solubility In Water
Not available.
Solubility In Fat
---
Molecular Weight
---
Voc Content
Not available.
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
Not available.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

Heat, flames, sparks and other sources of ignition.

Incompatible

Not available.

Decomposition

None identified.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON EP 5017 1TX20X25 D240?

The signal word is warning.

What is the physical form of TEROSON EP 5017 1TX20X25 D240?

TEROSON EP 5017 1TX20X25 D240 is a solid with black color. It has epoxy odor.

What is TEROSON EP 5017 1TX20X25 D240 used for?

1-c- epoxide adhesive

What are the hazard statements for TEROSON EP 5017 1TX20X25 D240?

This substance has 3 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H319: CAUSES SERIOUS EYE IRRITATION.

What is the melting point of TEROSON EP 5017 1TX20X25 D240?

The melting point is Not available. and the boiling point is Not available..