Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
1-c- epoxide adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butadiene, acrylonitrile polymer, carboxy-terminated, polymer with bisphenol A and epichlorohydrin | 68610-41-3 | 10 - 30% | Yes |
| Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 2,2'-(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane] MG=1150 | 25036-25-3 | 0.1 - 1% | Yes |
| 4,4'-Isopropylidenediphenol | 80-05-7 | 0.1 - 1% | Yes |
| Non hazardous components | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms develop and persist, get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 561K-1-005 known as Ablefilm 561K-1-005, 2 x 6
---
LOCTITE ABLESTIK 5020-1-005 known as Ablefilm 5020-1-005 (5011)
---
LOCTITE ABLESTIK 517-4-007/009 known as Ablefilm 517-4-007/.009
---
LOCTITE ABLESTIK CF 3352-0075 known as Ablefilm CF3352-0075
---
LOCTITE ABLESTIK 550-1-004 known as Ablefilm 550-1-004, Epoxy adhesive
---
LOCTITE ABLESTIK 5074 -125 12" X 20" SINGLE SH
---
LOCTITE ABLESTIK 84-1LMINB1 known as Ablebond 84-1LMINB1 (34g) (5011
---
LOCTITE ABLESTIK 965-1F known as Ablebond 965-1F (15g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Excessive heat.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Oxides of carbon and nitrogen, aldehydes, acids and undetermined organics.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12?
LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12 is a solid, film with white color. It has slight odor.
What is the solubility of LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12?
Insoluble Water
What is LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12 used for?
1-c- epoxide adhesive
What are the hazard statements for LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE ABLESTIK 561K-1-004 known as Ablefilm 561K-1-004, 12 x 12?
The melting point is > 150 °C (> 302°F) and the boiling point is > 150 °C (> 302°F).