Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT
- Product Code
- 597127
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alcohols, C6-10, ethoxylated propoxylated~ | 68987-81-5 | 5 - 10% | No |
| 2-Butylaminoethanol | 111-75-1 | 5 - 10% | No |
| 3,5,5-trimethylhexanoic acid, compound with 2-aminoethanol (1:1) | 93894-11-2 | 1 - 5% | No |
| Industrial preservative | 7747-35-5 | 1 - 5% | No |
| 3,5,5-Trimethylhexanoic acid | 3302-10-1 | 1 - 5% | No |
| Sodium EDTA | 64-02-8 | 1 - 5% | No |
| 4-(2-Nitrobutyl)morpholine | 2224-44-4 | 0.1 - 1% | No |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms are experienced, remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.
For skin contact, flush with large amounts of water. Seek immediate medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Seek immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FM 460 ACHESON
---
BONDERITE L-AD DEFOAMER LUBRICANT ADDITIVE ACHESON known as DTI DEFOAMER
---
BONDERITE L-AD BUFFER B LUBRICANT ADDITIVE ACHESON known as DTI BUFFER B
---
BONDERITE L-FG 144 BILLET COATING ACHESON known as DELTAFORGE144
---
BONDERITE L-FM 540B ACHESON
---
BONDERITE L-FM TI-KOTE A ACHESON CONVERSION COATING known as TI-KOTE A
---
BONDERITE L-FM 12010 ACHESON
---
BONDERITE L-FM 560 FORMING LUBRICANT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Provide adequate ventilation. Do not take internally.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear safety glasses; chemical goggles (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong acids or oxidizing agents.
None under normal processing.
Store away from incompatible materials.
Do not mix with nitrites.
Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons. Under acidic conditions, product may release formaldehyde which is a carcinogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT?
The signal word is danger.
What is the physical form of BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT?
BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT is a liquid with light amber color. It has mild odor.
What is the solubility of BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT?
Not available.
What is BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT used for?
Lubricant
What are the hazard statements for BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT?
This substance has 3 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE L-FM 360 ACHESON BODYMAKER COOLANT known as DTI 360 COOLANT?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F).