Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 2104-R known as TRA-BOND 2104-R
- Product Form
- Epoxy resin
- Product Code
- 1446030
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy resin | --- | 60 - 100% | Yes |
| Butyl 2,3-epoxypropyl ether | 2426-08-6 | 10 - 30% | Yes |
| Silica, amorphous, fumed, crystal-free | 112945-52-5 | 5 - 10% | Yes |
| Glass, oxide, chemicals | 65997-17-3 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 816H01-R known as TRA-BOND, 816H01-R
---
LOCTITE ABLESTIK 816H02-R known as TRA-BOND 816H02-R
---
LOCTITE ABLESTIK 826H02-R known as TRA-BOND 826H02-R
---
LOCTITE ABLESTIK 516H03-H known as TRA-BOND 516H03-H
---
LOCTITE ABLESTIK 9349 PTA known as TRA-BOND 9349 Part A
---
LOCTITE ABLESTIK FS 163-H known as TRA-BOND FS163-H
---
LOCTITE ABLESTIK 2116-H known as TRA-BOND 2116 BIPAX 2.2 GR - H
---
LOCTITE ECCOBOND F 114-R known as TRA-BOND F114-R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Refer to Section 8.
Store at or below 25 °C (77°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Hazardous polymerization can occur.
Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials.
Strong oxidizing agents. Strong acids and strong bases. Amines.
Oxides of carbon. Aldehydes. Acids. Ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 2104-R known as TRA-BOND 2104-R?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK 2104-R known as TRA-BOND 2104-R?
LOCTITE ABLESTIK 2104-R known as TRA-BOND 2104-R is a liquid with translucent, light yellow color. It has slight odor.
What are the hazard statements for LOCTITE ABLESTIK 2104-R known as TRA-BOND 2104-R?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- COMBUSTIBLE LIQUID.
What is the melting point of LOCTITE ABLESTIK 2104-R known as TRA-BOND 2104-R?
The melting point is Not applicable and the boiling point is Not available..