Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON VR 315 AE
- Product Code
- 211834, 15709A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Anaerobic
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylenes | 1330-20-7 | 10 - 30% | No |
| Propane | 74-98-6 | 10 - 30% | No |
| Naphtha, hydrotreated light, <0,1% benzene | 64742-49-0 | 10 - 30% | No |
| Limestone | 1317-65-3 | 10 - 30% | No |
| Butane | 106-97-8 | 10 - 30% | No |
| Isobutane | 75-28-5 | 10 - 30% | No |
| Acetone | 67-64-1 | 5 - 10% | No |
| Talc | 14807-96-6 | 5 - 10% | No |
| Magnesium carbonate | 546-93-0 | 1 - 5% | No |
| Titanium dioxide | 13463-67-7 | 1 - 5% | No |
| n-Butyl alcohol | 71-36-3 | 1 - 5% | No |
| Ethylbenzene | 100-41-4 | 1 - 5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Do not use high volume water jet.
Contents under pressure. Do not handle or store near an open flame, heat or other sources of ignition. Do not puncture or incinerate pressurized containers.
In case of fire, keep containers cool with water spray. Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Soak up with inert absorbent material. Scrape up as much material as possible. Store in a partly filled, closed container until disposal.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material; Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Keep container closed. Vapors will accumulate readily and may ignite explosively. Keep away from sources of ignition - no smoking. Do not puncture or incinerate pressurized containers. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Keep container closed. Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F).
Wash thoroughly after handling.
Keep away from sources of ignition - no smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Elevated temperatures. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Protect from direct sunlight.
Strong oxidizing agents.
No decomposition if used according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON VR 315 AE?
The signal word is warning.
What is the physical form of TEROSON VR 315 AE?
TEROSON VR 315 AE is a aerosol with light grey color. It has characteristic odor.
What is TEROSON VR 315 AE used for?
Anaerobic
What are the hazard statements for TEROSON VR 315 AE?
This substance has 7 hazard statements:
- H223: FLAMMABLE AEROSOL.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H335: MAY CAUSE RESPIRATORY IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H372: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
- CONTENTS UNDER PRESSURE.
What is the melting point of TEROSON VR 315 AE?
The melting point is Not available. and the boiling point is Not available..