NextSDS Logo
Safety Data Sheet EN

TEROSON RB 451L 3TX13X50 PE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON RB 451L 3TX13X50 PE
Product Code
2709625

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Sealing tapes

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Precautionary Statements

Not prescribed
Not prescribed
Not prescribed
Not prescribed

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Natural rubber --- 30 - 60% No
Limestone 1317-65-3 10 - 30% No
Talc 14807-96-6 10 - 30% No
Isoprene homopolymer 9003-31-0 5 - 10% No
Zinc oxide 1314-13-2 1 - 5% No
Urea 57-13-6 1 - 5% No
Carbon black 1333-86-4 1 - 5% No
Tetramethylthiuram disulfide 137-26-8 0.1 - 1% No

IDH number: 2709625 Product name: TEROSON RB 451L 3TX13X50 PE

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

Immediately flush eyes with water for at least 15 minutes, while holding eyelids open.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel.

Immediate Medical Attention

Seek medical attention if symptoms develop or persist (inhalation); Obtain medical attention if irritation persists (skin); Seek medical attention at once (eye); Get medical attention (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

None identified.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Store in a cool, dry area. Avoid moisture. Keep out of direct sunlight.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
Not determined
Explosive Limits
---
Vapor Density
---
Solubility In Fat
---
Auto Ignition Temperature
Not available.
State Under Standard Conditions
---
Flash Point
170.00 °C (338°F)
Properties Status
---
Flammability
Not applicable
Physical State Data
liquid
Melting Point
Not determined
Physical State
Paste
Ph
Not available.
Cloud Point
---
Solidification Point
---
Solubility In Water
Not available.
Relative Density
1.25
Colour Intensity
---
Appearance
---
Partition Coefficient
Not determined log Pow:
Density
---
Solubility
---
Metal Corrosion
---
Voc Content
Not determined
Softening Point
---
Odor Threshold
Not available.
Evaporation Rate
Not determined
Form
---
Decomposition Temperature
Not available.
Upper Explosive Limit
Not available.
Molecular Weight
---
Crystallisation Point
---
Relative Evaporation Rate
---
Bulk Density
---
Colour
Black
Dynamic Viscosity
---
Lower Explosive Limit
Not available.
Vapor Pressure
Not determined
Odor
---
Freezing Point
---
Kinematic Viscosity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Not available.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Avoid excessive heat and ignition sources.

Incompatible

Oxidizing agents. Halogens. Metal salts. Metal compounds. Alkalis. Acids. Metal oxides. Carbides This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product emits oxides of sulfur, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON RB 451L 3TX13X50 PE?

The signal word is no signal word.

What is the physical form of TEROSON RB 451L 3TX13X50 PE?

TEROSON RB 451L 3TX13X50 PE is a paste with black color.

What is TEROSON RB 451L 3TX13X50 PE used for?

Sealing tapes

What is the melting point of TEROSON RB 451L 3TX13X50 PE?

The melting point is Not determined and the boiling point is Not determined.