LOCTITE 430 GEN. PURPOSE INSTANT ADHESIVE known as 430 Super Bonder® Instant Adhe

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Do not pull bonded skin apart. Soak in warm soapy water. Gently peel apart using a blunt instrument. If skin is burned due to the rapid generation of heat by a large drop, seek medical attention. If lips are bonded, apply warm water to the lips and encourage wetting and pressure from saliva in mouth. Peel or roll lips apart. Do not pull lips apart with direct opposing force.

Symptoms: Skin can be burned due to the rapid generation of heat by a large drop.

Immediately flush with plenty of water for at least 15 minutes. Get medical attention. If eyelids are bonded closed, release eyelashes with warm water by covering with a wet pad. Do not force eye open. Keep eye covered until debonding is complete, usually within 1-3 days.

Symptoms: Cyanoacrylate will bond to eye protein and will cause a lachrymatory effect. Solid particles of polymerized cyanoacrylate trapped behind the eyelid can cause abrasive damage.

Ensure breathing passages are not obstructed. Saliva will separate any solidified product in several hours. Prevent the patient from swallowing any separated mass.

Symptoms: The product will polymerize rapidly and bond to the mouth making it almost impossible to swallow.

Water spray (fog), foam, dry chemical or carbon dioxide.

Wear a self-contained breathing apparatus with a full face piece operated in pressure-demand or other positive pressure mode.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Ventilate area. Do not allow product to enter sewer or waterways.

Do not use cloths for mopping up. Flood with water to complete polymerization and scrape off the floor.

Materials: water

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Avoid contact with fabric or paper goods. Contact with these materials may cause rapid polymerization which can generate smoke and strong irritating vapors, and cause thermal burns.

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Wash thoroughly after handling.

Keep in a cool, well ventilated area away from heat, sparks and open flame.

Stable under recommended storage conditions.

Not available.

Rapid exothermic polymerization will occur in the presence of water, amines, alkalis and alcohols.

Spontaneous polymerization.

Water, amines, alkalis and alcohols.

Not available.

Inner packagings of 500 ml or less do not meet the regulatory definition provided for "Aviation regulated liquids, n.o.s." and so are "Not Subject to Regulation"