NextSDS Logo
Safety Data Sheet EN

TEROSON EV 3D 53372624

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON EV 3D 53372624
Product Code
2369444

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Not available.

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Resp. Sens. Cat. 1
Skin Sens. Cat. 1

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.

Precautionary Statements

P261 Avoid breathing dust or fumes.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves.
P285 In case of inadequate ventilation wear respiratory protection.
P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P352 IF ON SKIN: Wash with plenty of water.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethene, homopolymer 9002-88-4 1 - 5% Yes
C,C'-azodi(formamide) 123-77-3 1 - 5% Yes
Talc 14807-96-6 1 - 5% Yes
Propylidynetrimethyl trimethacrylate 3290-92-4 1 - 5% Yes
4,4'-Oxydi(benzenesulphonohydrazide) 80-51-3 0.1 - 1% Yes

IDH number: 2369444 Product name: TEROSON EV 3D 53372624

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.

Skin contact

Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not breathe fumes or dust from this material. For industrial use only. Do not take internally.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
Not applicable
Relative Density
---
Ph
Not available.
Form
---
Solidification Point
---
State Under Standard Conditions
---
Odor Threshold
Not available.
Cloud Point
---
Lower Explosive Limit
Not available.
Flammability
Not applicable
Decomposition Temperature
Not available.
Properties Status
---
Dynamic Viscosity
Not available.
Colour
Yellow
Colour Intensity
---
Upper Explosive Limit
Not available.
Vapor Density
Not available.
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Partition Coefficient
Not available.
Odor
Characteristic
Softening Point
---
Solubility In Fat
---
Auto Ignition Temperature
Not available.
Melting Point
Not available.
Molecular Weight
---
Kinematic Viscosity
Not available.
Voc Content
Not available.
Boiling Point
Not available.
Physical State Data
solid
Density
---
Bulk Density
---
Relative Evaporation Rate
---
Solubility In Water
Not available.
Solubility
---
Appearance
---
Freezing Point
---
Physical State
Solid
Explosive Limits
---
Metal Corrosion
---
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

This product may react with strong acids, bases and oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON EV 3D 53372624?

The signal word is danger.

What is the physical form of TEROSON EV 3D 53372624?

TEROSON EV 3D 53372624 is a solid with yellow color. It has characteristic odor.

What is TEROSON EV 3D 53372624 used for?

Not available.

What are the hazard statements for TEROSON EV 3D 53372624?

This substance has 2 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.

What is the melting point of TEROSON EV 3D 53372624?

The melting point is Not available. and the boiling point is Not available..