Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON RB 4100 BK
- Product Form
- Sealant
- Product Code
- 804495
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane | 64742-49-0 | 10 - 30% | Yes |
| Distillates (petroleum), solvent-refined light paraffinic, < 3%DMSO | 64741-89-5 | 10 - 30% | Yes |
| Barite (Ba(SO4)) | 13462-86-7 | 5 - 10% | Yes |
| Quartz (SiO2), <1% respirable | 14808-60-7 | 0.1 - 1% | Yes |
| Fluorite (CaF2) | 14542-23-5 | 0.1 - 1% | Yes |
| Carbon black - Nano | 1333-86-4 | 0.1 - 1% | Yes |
| n-Hexane | 110-54-3 | 0.1 - 1% | Yes |
| Quartz (SiO2) "respirable particulates (reaches the alveoli)" (RCS) <0.1% | 14808-60-7 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
Wash with plenty of water immediately and continue for several minutes, holding eyelid open.
Rinse the mouth. Drink 1-2 glasses of water. Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Consult a doctor (eye). Seek medical attention from a specialist (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Do not handle or store near an open flame, heat or other sources of ignition.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Remove all sources of ignition. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Remove all sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None identified.
Take measures to prevent the build-up of electrostatic charges.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3175
- Shipping Name
- Solids containing flammable liquid, n.o.s. (Solvent naphtha)
- Transport Class
- 4.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON RB 4100 BK?
The signal word is danger.
What is the physical form of TEROSON RB 4100 BK?
TEROSON RB 4100 BK is a pasty with black color. It has petroleum odor.
What is the solubility of TEROSON RB 4100 BK?
Insoluble Water
What are the hazard statements for TEROSON RB 4100 BK?
This substance has 5 hazard statements:
- H228: FLAMMABLE SOLID
- H315 + H320: CAUSES SKIN AND EYE IRRITATION
- H336: MAY CAUSE DROWSINESS OR DIZZINESS
- H350: MAY CAUSE CANCER
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD
What is the melting point of TEROSON RB 4100 BK?
The melting point is Not applicable, Determination technically not possible and the boiling point is 60 °C (140°F).