Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)
- Product Code
- 1577132
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quartz (SiO2), <1% respirable | 14808-60-7 | 30 - 60% | Yes |
| Bisphenol-F Epichlorhydrin resin | 9003-36-5 | 10 - 30% | Yes |
| Formaldehyde, polymer with epichlorohydrin and o-cresol | 29690-82-2 | 10 - 30% | Yes |
| 1,4-bis(2,3 epoxypropoxy)butane | 2425-79-8 | 10 - 30% | Yes |
| dapsone | 80-08-0 | 1 - 5% | Yes |
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 0.1 - 1% | Yes |
| 1,4-Butanediol monoglycidyl ether | 4711-95-9 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Remove all sources of ignition. Keep unnecessary personnel away. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 84-3LV known as Ablebond 84-3LV (9g)
---
LOCTITE ABLESTIK 84-3J known as Ablebond 84-3J (454g)
---
LOCTITE ABLESTIK 84-1LMIS known as Ablebond 84-1LMIS (28.3g)
---
LOCTITE ABLESTIK 84-1LMINB1 known as Ablebond 84-1LMINB1 (34g) (5011
---
LOCTITE ABLESTIK 8390 known as Ablebond 8390 (34g)
---
LOCTITE ABLESTIK 85-1 known as Ablebond 85-1 (5011) (5g)
---
LOCTITE ABLESTIK 84-1LMINB known as Ablebond 84-1LMINB(5011)(3.6g)
---
LOCTITE ABLESTIK 958-7 known as Ablebond 958-7 (5011) (4.5g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves. Keep container closed.
Store at or below -40 °C (-40°F). Keep container tightly closed and in a cool, well-ventilated place. Store in a dry place. Avoid moisture. Protect from direct sunlight.
Wash thoroughly after handling. When using do not eat, drink or smoke.
Remove all sources of ignition. Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Elevated temperatures.
Oxidizing agents. Acids. Bases. Amines.
Oxides of carbon. Phenolics. Toxic fumes. Irritating vapors. Silicon tetrafluoride. Oxides of nitrogen. Irritating organic fragments.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)?
The signal word is danger.
What is the physical form of LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)?
LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g) is a liquid, paste with blue color. It has mild odor.
What is the solubility of LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)?
Largely insoluble. Water
What is LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g) used for?
Epoxy adhesive
What are the hazard statements for LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)?
This substance has 5 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)?
The melting point is Not applicable, Product is a liquid and the boiling point is > 200 °C (> 392°F) Polymerizes before boiling point is reached..