NextSDS Logo
Safety Data Sheet EN

BONDERITE M-NT 1303 MU NON CHROME TREATMENT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE M-NT 1303 MU NON CHROME TREATMENT
Product Code
594009
Synonyms
BONDERITE 1303 MAKEUP

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product for the conversion treatment of metals

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1
Skin Sens. Cat. 1 H317
Carc. Cat. 1B H350
STOT RE Cat. 1 H372

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H290 MAY BE CORROSIVE TO METALS.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H350 MAY CAUSE CANCER.
H372 CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original packaging.
P260 Do not breathe vapors, mist, or spray.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P304 + P340 + P310 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 10 - 30% Yes
Cobalt dinitrate 10141-05-6 1 - 5% Yes
Sodium chlorate 7775-09-9 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately remove soiled or soaked clothing. Flush with large amounts of water. Seek immediate medical attention.

Eye contact

Rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.

Ingestion

Get immediate medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

This product is an aqueous mixture which will not burn.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State Data
liquid
Flammability
Not applicable
Density
---
Colour Intensity
---
Properties Status
---
Crystallisation Point
---
Molecular Weight
---
Auto Ignition Temperature
Not determined
Solubility In Fat
---
Vapor Pressure
Not determined
Voc Content
Not applicable
Solubility
Complete Water
Lower Explosive Limit
Not available.
State Under Standard Conditions
---
Appearance
---
Decomposition Temperature
Not available.
Relative Density
1.25 - 1.28 at 15.6 °C (60.08 °F)
Upper Explosive Limit
Not available.
Boiling Point
> 100 °C (> 212°F) calculated
Colour
Brown
Ph
> 13.5
Odor
Mild
Vapor Density
---
Metal Corrosion
---
Flash Point
Not applicable
Physical State
Liquid
Kinematic Viscosity
Not available.
Partition Coefficient
Not determined
Solubility In Water
---
Freezing Point
---
Cloud Point
---
Relative Evaporation Rate
---
Solidification Point
---
Odor Threshold
Not available.
Evaporation Rate
Not available.
Bulk Density
---
Form
---
Melting Point
Not determined
Explosive Limits
---
Softening Point
---
Dynamic Viscosity
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

Will not occur.

Avoid

No data available.

Incompatible

Reacts with acids.

Decomposition

None expected.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1824
Shipping Name
Sodium hydroxide solution
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE M-NT 1303 MU NON CHROME TREATMENT known by?

BONDERITE M-NT 1303 MU NON CHROME TREATMENT is also known as: BONDERITE 1303 MAKEUP

What is the hazard signal word for BONDERITE M-NT 1303 MU NON CHROME TREATMENT?

The signal word is danger.

What is the physical form of BONDERITE M-NT 1303 MU NON CHROME TREATMENT?

BONDERITE M-NT 1303 MU NON CHROME TREATMENT is a liquid with brown color. It has mild odor.

What is the solubility of BONDERITE M-NT 1303 MU NON CHROME TREATMENT?

Complete Water

What is BONDERITE M-NT 1303 MU NON CHROME TREATMENT used for?

Product for the conversion treatment of metals

What are the hazard statements for BONDERITE M-NT 1303 MU NON CHROME TREATMENT?

This substance has 5 hazard statements:

  • H290: MAY BE CORROSIVE TO METALS.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H350: MAY CAUSE CANCER.
  • H372: CAUSES DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.

What is the melting point of BONDERITE M-NT 1303 MU NON CHROME TREATMENT?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) calculated.