Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70
- Product Code
- QM8057-V56
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Die attach adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608 (toll free)
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300 (toll free)
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethene, tetrafluoro-, homopolymer | 9002-84-0 | 30 - 60% | Yes |
| Amines, C36-alkylenedi-, maleated | 682800-79-9 | 10 - 30% | Yes |
| Titanium dioxide | 13463-67-7 | 5 - 10% | Yes |
| bis(4-tert-butylcyclohexyl) peroxydicarbonate | 15520-11-3 | 1 - 5% | Yes |
| 2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane | 3388-04-3 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. This product is combustible at high temperatures.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK QMI536 known as QMI536 STATSCHPPC 7337 10cc EFD
---
LOCTITE ABLESTIK QMI519 10CC SY
---
LOCTITE ABLESTIK QMI529HT
---
LOCTITE ABLESTIK QMI505MT known as QMI 505MT Stock (7150) 10cc EFD
---
LOCTITE ABLESTIK QMI536NB known as HYSOL QMI536NB (13.7g)
---
LOCTITE ABLESTIK QMI529HT known as 529HT Stock (7367) 3cc EFD
---
LOCTITE ABLESTIK QMI536 known as QMI 536 Kavlico (7169) 30cc EFD
---
LOCTITE ABLESTIK QMI516 known as HYSOL QMI516 10cc EFD NS
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not taste or swallow. Refer to Section 8.
Store at or below -40 °C (-40°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing. Polymerization may occur at elevated temperature or in the presence of incompatible materials.
Store away from incompatible materials. Heat, flames, sparks and other sources of ignition. High temperatures.
Strong oxidizing agents (peroxides, chlorine, strong acids). Strong reducing agents. Strong alkalis. Finely divided active metals. Amines.
Oxides of carbon. Oxides of nitrogen. Oxides of silicon. Carbonyl fluoride. Hydrogen fluoride. Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Bismaleimide resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70?
LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70 is a liquid, or, paste with white color. It has mild odor.
What is the solubility of LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70?
Insoluble Water
What is LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70 used for?
Die attach adhesive
What are the hazard statements for LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of LOCTITE ABLESTIK QMI536NB known as QMI536NB 10CC EFD WHT PST 13.70?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Polymerization may occur at elevated temperature..