Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626
- Product Code
- 721440
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Solder Paste
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608 (toll free)
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300 (toll free)
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tin | 7440-31-5 | 80 - 100% | Yes |
| rosin | 8050-09-7 | 1 - 5% | Yes |
| Silver | 7440-22-4 | 1 - 5% | Yes |
| Octadecanoic acid, 12-hydroxy-, reaction products with ethylenediamine | 100545-48-0 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get immediate medical attention.
Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE LF 318 96SCAGS88.5 XU known as 96SC LF318 AGS 88.5 600G SEMCO
---
LOCTITE LF 318 96SCAGS88.5V B known as 96SC LF318 AGS88.5V 500G/J
---
LOCTITE MP 218 63S4ACP89V AU known as 63S4MP218ACP89V 500G JAR
---
LOCTITE CR 32 95AAGS88 C known as 95SN/5SB CR32 AGS88 250G/J
---
LOCTITE CR 32 95AAGS88 C known as 95A CR32 AGS88 250GJ - LN
---
LOCTITE LIOFOL BC 1584 DR-F220KG
---
LOCTITE HF 228 90ISCT4 885V 67M
---
LOCTITE LB 8008 C5-A
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Avoid contact with eyes, skin and clothing. Avoid skin contact with molten resins. Do not wear contact lenses. Wash thoroughly after handling.
Store in original container until ready to use. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not available.
Will not occur.
Solder alloy will react with concentrated nitric acid to produce toxic fumes of nitrogen oxides.
Oxidizing agents.
Oxides of carbon. Oxides of Metals in Section 3. Formaldehyde. Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626?
The signal word is danger.
What is the physical form of LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626?
LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626 is a paste, solid with gray / grey color. It has mild odor.
What is the solubility of LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626?
Not miscible
What is LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626 used for?
Solder Paste
What are the hazard statements for LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of LOCTITE LF 318 97SCAGS88.5 BU known as 97SC LF318 AGS 88.5 JAR MB626?
The melting point is 217 °C (422.6 °F) (solder alloy) and the boiling point is 256 °C (492.8 °F)(solvent).