NextSDS Logo
Safety Data Sheet EN

BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S
Product Code
1833575

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Surfactant Mixtures

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Alkylphenol ethoxylate 9036-19-5 10 - 30% Yes
Alcohols, C10-12, ethoxylated, propoxylated 68154-97-2 5 - 10% Yes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air.

Skin contact

Immediately flush skin with plenty of water (using soap, if available).

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Do not take internally. For industrial use only.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Manufacturer recommends storing above 4.4 °C (40 °F). Thaw and mix thoroughly if frozen.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.

Hands

Chemical resistant, impermeable gloves.

Eyes

Wear chemical goggles; face shield (if splashing is possible).

Respiratory

If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.

Skin/Body

Use of impervious apron and boots are recommended.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
Complete Water Aqueous solution
Voc Content
0 % EPA Method 24
Decomposition Temperature
Not available.
Auto Ignition Temperature
Not available.
Solubility In Fat
---
Relative Evaporation Rate
---
Upper Explosive Limit
Not applicable
Properties Status
---
State Under Standard Conditions
---
Colour
Colorless / Colorless to light yellow
Molecular Weight
---
Melting Point
Not determined
Solidification Point
---
Appearance
---
Lower Explosive Limit
Not applicable
Explosive Limits
---
Flash Point
Not applicable
Physical State Data
liquid
Colour Intensity
---
Odor
Ammoniacal
Kinematic Viscosity
Not available.
Vapor Density
---
Partition Coefficient
Not available.
Crystallisation Point
---
Evaporation Rate
Not available.
Ph
8.5 - 9.9
Density
---
Vapor Pressure
Not determined
Relative Density
---
Solubility In Water
---
Freezing Point
---
Metal Corrosion
---
Dynamic Viscosity
Not available.
Softening Point
---
Boiling Point
> 100 °C (> 212°F) Boiling point
Odor Threshold
Not available.
Physical State
Liquid
Form
---
Flammability
Not applicable
Bulk Density
---
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Store away from incompatible materials.

Incompatible

This product may react with strong oxidizing agents. This product may react with strong reducing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S?

The signal word is danger.

What is the physical form of BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S?

BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S is a liquid with colorless / colorless to light yellow color. It has ammoniacal odor.

What is the solubility of BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S?

Complete Water Aqueous solution

What is BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S used for?

Surfactant Mixtures

What are the hazard statements for BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of BONDERITE C-AD 1523 S SURFACTANT ADDITIVE known as Parco Cleaner 1523 S?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F) Boiling point.