Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON RB 3208 PA-25 DR290KG
- Product Code
- 1904666
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
adhesive and sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608 (toll free)
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300 (toll free)
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Limestone | 1317-65-3 | 30 - 60% | Yes |
| Calcium carbonate | 471-34-1 | 10 - 30% | Yes |
| Calcium oxide | 1305-78-8 | 1 - 5% | Yes |
| Carbon black - Nano | 1333-86-4 | 1 - 5% | Yes |
| Phthalic anhydride | 85-44-9 | 0.1 - 1% | Yes |
| di(benzothiazol-2-yl) disulphide | 120-78-5 | 0.1 - 1% | Yes |
| C,C'-azodi(formamide) | 123-77-3 | 0.1 - 1% | Yes |
IDH number: 1904666 Product name: TEROSON RB 3208 PA-25 DR290KG
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air.
Immediately wash skin thoroughly with soap and water.
In case of contact with eyes, rinse immediately with plenty of water.
Rinse the mouth. Drink 1-2 glasses of water. Do not induce vomiting.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation). Obtain medical attention if irritation persists (skin). Seek medical advice (eyes). Get immediate medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
None identified.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Provide adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in original container until ready to use. Store in sealed original container.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid excessive heat and ignition sources.
No data available.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON RB 3208 PA-25 DR290KG?
The signal word is danger.
What is the physical form of TEROSON RB 3208 PA-25 DR290KG?
TEROSON RB 3208 PA-25 DR290KG is a solid with black color. It has characteristic odor.
What is TEROSON RB 3208 PA-25 DR290KG used for?
adhesive and sealant
What are the hazard statements for TEROSON RB 3208 PA-25 DR290KG?
This substance has 3 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of TEROSON RB 3208 PA-25 DR290KG?
The melting point is Not available. and the boiling point is Not available..