Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON MS 930 GY known as TEROSTAT MS 930 GREY
- Product Code
- 605520
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
CHEMTREC
1-703-527-3887
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium carbonate | 471-34-1 | 30 - 60% | Yes |
| Dimethoxymethylsilyl Propyl Derivate | 75009-88-0 | 10 - 30% | Yes |
| Titanium dioxide | 13463-67-7 | 5 - 10% | Yes |
| Dibutoxydibutylstannane | 3349-36-8 | 0.1 - 1% | Yes |
IDH number: 605520 Product name: TEROSON MS 930 GY known as TEROSTAT MS 930 GREY
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours or decomposition products. If symptoms develop and persist, get medical attention.
Wipe off paste with paper towel or cloth. Wash with soap and water. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If adverse health effects develop seek medical attention.
Do not induce vomiting. In case of adverse health effects seek medical advice.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
None identified.
Prevent inhalation of fumes and gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow product to enter sewer or waterways.
Scrape up as much material as possible.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not handle contact lenses until all sealant has been removed from hands. Residual sealant may transfer to lenses and cause eye irritation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store between 50°F and 80°F. (10° and 27°C)
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials. Exposure to moisture.
Strong oxidizing agents. Acids and bases.
Oxides of carbon. Oxides of silicon. Formaldehyde. Hydrocarbons. Irritating fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON MS 930 GY known as TEROSTAT MS 930 GREY?
The signal word is danger.
What is the physical form of TEROSON MS 930 GY known as TEROSTAT MS 930 GREY?
TEROSON MS 930 GY known as TEROSTAT MS 930 GREY is a solid with grey color. It has mild odor.
What is TEROSON MS 930 GY known as TEROSTAT MS 930 GREY used for?
Sealant
What are the hazard statements for TEROSON MS 930 GY known as TEROSTAT MS 930 GREY?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
What is the melting point of TEROSON MS 930 GY known as TEROSTAT MS 930 GREY?
The melting point is Not available. and the boiling point is Not determined.