Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON SB PL605-4 TO1376KG
- Product Code
- 2811927
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous Component(s) | CAS Number | Weight %
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methyl ethyl ketone | 78-93-3 | 30 - 60% | Yes |
| Phenolic resin | 9039-25-2 | 10 - 30% | Yes |
| 2-Propanol | 67-63-0 | 10 - 30% | Yes |
| Cashew, nutshell liq., polymer with formaldehyde and phenol | 67700-42-9 | 5 - 10% | Yes |
| Carbon black | 1333-86-4 | 1 - 5% | Yes |
| Phenol | 108-95-2 | 1 - 5% | Yes |
| o-Cresol | 95-48-7 | 0.1 - 1% | Yes |
| methenamine | 100-97-0 | 0.1 - 1% | Yes |
| 2-Butanol | 78-92-2 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. Get immediate medical attention.
Immediately wash skin thoroughly with soap and water. Remove contaminated clothing and footwear. Get immediate medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get immediate medical attention.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
This material, if aspirated into the lungs, may cause lipoid pneumonitis. Treat affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Vapours may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Overexposure to decomposition products may cause a health hazard.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Water should be used to cool closed containers to prevent pressure build-up and possible autoignition or explosion when exposed to extreme heat.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Water should be used to cool closed containers to prevent pressure build-up and possible autoignition or explosion when exposed to extreme heat.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal. Dispose of according to Federal, State and local governmental regulations. Remove all sources of ignition. Use non-sparking tools for clean-up.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not handle or store near an open flame, heat or other sources of ignition. Avoid breathing vapors or mists of this product. Wear suitable protective clothing, safety glasses and gloves. Avoid contact with eyes, skin and clothing.
Store between 0 °C (32°F) and 46 °C (114.8 °F). Store away from heat, sparks, flames, or other sources of ignition.
Do not handle or store near an open flame, heat or other sources of ignition. Store away from heat, sparks, flames, or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Avoid excessive heat (>46°C (>115°F)) and sources of ignition.
Strong acids and strong bases.
Burning, including when heated by welding or cutting, will produce smoke, carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1133
- Shipping Name
- Adhesives
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON SB PL605-4 TO1376KG?
The signal word is danger.
What is the physical form of TEROSON SB PL605-4 TO1376KG?
TEROSON SB PL605-4 TO1376KG is a liquid with black color. It has solvent odor.
What is the solubility of TEROSON SB PL605-4 TO1376KG?
Partially miscible Water; of high solubility ketones
What are the hazard statements for TEROSON SB PL605-4 TO1376KG?
This substance has 8 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of TEROSON SB PL605-4 TO1376KG?
The melting point is Not applicable, Product is a liquid and the boiling point is 77 °C (170.6 °F).