Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEROSON EP 5010 TR PTA
- Product Code
- 2952805
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part A of 2-K-Epoxy Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epichlorohydrin-4,4'-isopropylidene diphenol resin | 25068-38-6 | 30 - 60% | Yes |
| Glass, oxide, chemicals | 65997-17-3 | 10 - 30% | Yes |
| Limestone | 1317-65-3 | 10 - 30% | Yes |
| oxirane, mono[(C12-14-alkyloxy)methyl] derivs. | 68609-97-2 | 5 - 10% | Yes |
| Calcium oxide | 1305-78-8 | 0.1 - 1% | No |
IDH number: 2952805 Product name: TEROSON EP 5010 TR PTA
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately remove soiled or soaked clothing. Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If symptoms develop and persist, get medical attention.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Protect from freezing.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Reaction with some curing agents may produce an exothermic reaction which in large masses could cause runaway polymerization.
Avoid excessive heat and ignition sources.
Reacts with strong oxidants. Reacts with amines, phenols, acids, alkalis.
Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition. Burning of dried polymer may release vinylidene chloride, hydrogen chloride, carbon dioxide and carbon monoxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3077
- Shipping Name
- Environmentally hazardous substance, solid, n.o.s. (Epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEROSON EP 5010 TR PTA?
The signal word is warning.
What is the physical form of TEROSON EP 5010 TR PTA?
TEROSON EP 5010 TR PTA is a pasty with grey color. It has characteristic odor.
What is TEROSON EP 5010 TR PTA used for?
Part A of 2-K-Epoxy Adhesive
What are the hazard statements for TEROSON EP 5010 TR PTA?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of TEROSON EP 5010 TR PTA?
The melting point is Not available. and the boiling point is Not available..